Don Rome STB Bars
The brackets are all the same since I drill the holes in jig, and use a template for the outside shape that's located in position using the bolt holes and 1/2" diameter pins. The main thing is you got them to fit so that's really all that matters. The rear brackets can't be seen anyway.
Teching In
Joined: Jun 2010
Posts: 19
Likes: 0
From: Northern AZ
The brackets are all the same since I drill the holes in jig, and use a template for the outside shape that's located in position using the bolt holes and 1/2" diameter pins. The main thing is you got them to fit so that's really all that matters. The rear brackets can't be seen anyway.
Teching In
Joined: Jun 2010
Posts: 19
Likes: 0
From: Northern AZ
I have only had a handful of cars that my parts didn't fit, so you have a rare car. I'm guessing the body putty welds are applied by hand, and sometimes they get them off the mark. Sometimes the location of the strut mount studs vary too, since they are in the rubber strut mount.
Teching In
Joined: Jun 2010
Posts: 19
Likes: 0
From: Northern AZ
I have only had a handful of cars that my parts didn't fit, so you have a rare car. I'm guessing the body putty welds are applied by hand, and sometimes they get them off the mark. Sometimes the location of the strut mount studs vary too, since they are in the rubber strut mount.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
http://www.drcustomparts.com/Prices.htm
Just FYI you'd be better off buying the rear one, unless you just want it for looks. The front helps a little, but the rear one is where it counts.
On The Tree
Joined: Aug 2010
Posts: 110
Likes: 0
Ok great thanks. I had bought some for my GS from Don sometime ago. The front already had the holes. I got some SLP stb's and put those on my GS. Took the other one and put it on the rear of my SS. I had put the SLP on the SS but it was too much interior noise with it sitting on the alt. Other than that good fit.
I just received a set of bars and brackets that I shipped to Milana Lerman in Canada and the package was marked unclaimed. If you are a member here please contact me about this matter.
