More LS1/LS6 speciality part swap pics 5/29
#21
Thanks for the update. I see you have headers, how is the Crossover conflicting with the LS6 intake? Any photos of that would be nice. I hear its a problem point for many that have doen the swap, but I haven't seen any photos of the finished intake on a car with headers yet.
#24
Agreed, that looks great. Much better than mine. I'm kinda jealeous of that adapter. I have a 1.5" chunk of aluminum to make a thicker adapter and clean up my airbox install, but it will take me a long time to get that up and running because I don't want to pay a machine shop to do the work.
#25
Thanks guys. I just hope my rear plug will clear the PS reservoir. I have to work this Saturday too. So the overtime is going to pay for the OPSU adapter (85.00!) and hopefully a custom crossover tube once I get it running.
#26
Painted Metallic black
2 coats adhesion primer
2 coats primer/filler gray
3 coats Metallic black
2 coats crystal clear
Pics don't do justice. The sparkles look like dust in the pics. Also painted the fuel rail. Used Dupli-color paints.
2 coats adhesion primer
2 coats primer/filler gray
3 coats Metallic black
2 coats crystal clear
Pics don't do justice. The sparkles look like dust in the pics. Also painted the fuel rail. Used Dupli-color paints.
Last edited by DavidGXP; 06-12-2010 at 09:39 PM.
#28
New tool for serpintine belt in order to swap alt brackets
Also here is the serpintine thread
https://ls1tech.com/forums/ls4-front...anna-help.html
Also here is the serpintine thread
https://ls1tech.com/forums/ls4-front...anna-help.html