10 minute mod
10 minute mod so i had an idea today as i looked at the rear of my car, i didnt like how it said grandprix on the bottom left of the trunk so i took the X and P off, saved them then took off the other letters and put the X and P back on , i think i looks way better , just a 10 minute project,. and the last pic i am sooo damn close to biting the bullet and buying it so i can throw a 03/04 termi motor in it, been one of my dream builds for a while now.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
i used a hair dryer and my pocket knife but was very careful not to scratch the paint, i removed all letter except the G for alignment purposes. then i used some deep creep 
to get the sticky and extra stuff off, then rinsed off with water. then im sure some 3M would work good but i used just a dusting of gorrilla glue (yikes) not sure if that was a good idea or not but there staying real good plus its weatherproof.
to get the sticky and extra stuff off, then rinsed off with water. then im sure some 3M would work good but i used just a dusting of gorrilla glue (yikes) not sure if that was a good idea or not but there staying real good plus its weatherproof. 
the gas tank is a must when doing any form of wieght reduction.
Launching!
Joined: Mar 2010
Posts: 265
Likes: 0
From: Morristown, IN
A t-5? You're not planning on keeping that thing are you?!?!
I may know where a 60k mile termi motor and viper spec 6 spd is for very cheap. If you get the car let me know and I'll see if it's still available. Well worth the drive from MI to IN.
I personally like the notches. I had cash in hand and called about one, 10 point cage, mini tubbed, rear coil-overs, solid body, $800 and about 10 miles away. sold within hours of being posted on craigslist. i was pissed.
I may know where a 60k mile termi motor and viper spec 6 spd is for very cheap. If you get the car let me know and I'll see if it's still available. Well worth the drive from MI to IN.
I personally like the notches. I had cash in hand and called about one, 10 point cage, mini tubbed, rear coil-overs, solid body, $800 and about 10 miles away. sold within hours of being posted on craigslist. i was pissed.
Registered User
Joined: Mar 2010
Posts: 31
Likes: 0
From: Boynton Beach, FL
Teching In
Joined: Aug 2008
Posts: 35
Likes: 0
From: Oak Creek, WI
Looks very nice! I wish GM had seen fit to to put 5.3L before the V8 badge so people would stop asking to see the Northstar they think is under the hood. The Mustang looks nice, but 6200 seems steep for a car that must be 17 years old. What's under the hood? And yeah, with the terminator motor, that car would be an awesome semi sleeper, at least until someone gets close enough to see the rollcage.
