LS1 Intake Manifold
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Does anyone know it this manifold will fit
http://www.exoticperformanceplus.com...ex.html?item=5
its suppost to be a replacement for an ls1 and I was wondering if it could be modded the same way to fit our cars
http://www.exoticperformanceplus.com...ex.html?item=5
its suppost to be a replacement for an ls1 and I was wondering if it could be modded the same way to fit our cars
Last edited by Aaron_Provost; 10-20-2010 at 10:57 PM.
#5
12 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Renton, WA
Posts: 2,563
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just get a Ls1 intake. 650.00 plus shipping is crazy. I bet you'd only gain about 7hp over a ls1 on a cold motor. Once it heats up you'll probly make less power then the LS4 intake.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That being said. Buy it and let us know what kind of results you see out of it.
Trending Topics
#9
Teching In
Join Date: Oct 2010
Location: twin citys, minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I too was wondering if any one could mod one of the ls6 intakes for me since porting our stock ls4 intake just doesn't gain us much. Plus power to cost the ls6 is a lot better than a ported ls4. Now that I'm thinking anout this Alabama guy said he might be willing to mod the ls6 intakes and sell them to us. Maybe he will chime in here and clarify this?
#10
TECH Resident
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has anyone tried to enlarge the neck on the LS4 intake?
It necks down to clear the OPSU, but it clears it by quite a bit. What about cutting out the necked down portion of the intake and reshaping that area to either just clear (keeping the OPSU stock) or making it fully round by modifying the OPSU boss.
Either way you should see a significant improvement and it would be the simpliest/cheapest upgrade option.
It necks down to clear the OPSU, but it clears it by quite a bit. What about cutting out the necked down portion of the intake and reshaping that area to either just clear (keeping the OPSU stock) or making it fully round by modifying the OPSU boss.
Either way you should see a significant improvement and it would be the simpliest/cheapest upgrade option.
#12
11 Second Club
iTrader: (3)
Join Date: Dec 2006
Location: Alabama
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The Weiand intakes are decent intakes for what they are. The results I have seen net that they make just barely noticable gains and only in the upper RPM areas. As Alabama Guy stated that with the limited room (both to the bottom of the hood and between the valve covers) there is NOT alot of room for air to pass over it to cool it down.
I have seen several in person and they are pretty nice looking pieces (the guy that won the car show at LS Fest from Athens, AL has a polished Weiand intake), so I could see from a show and shine point of view. They typically are really nice looking intakes.
The biggest argument from the f-body crowd is the power per dollar argument. Since these intake are not but minutely better and only in a very small range (for typical people) then just spend the $100 less and get a LS6 intake. If most people are going to take the dive to spend the money on an aftermarket intake most people just spend the extra money and get the ~15RWHP AND Torque and not just 5 or 7.
I hope this helps.
Digging the sig Travis. S.A.R. FTW!!!!
I have seen several in person and they are pretty nice looking pieces (the guy that won the car show at LS Fest from Athens, AL has a polished Weiand intake), so I could see from a show and shine point of view. They typically are really nice looking intakes.
The biggest argument from the f-body crowd is the power per dollar argument. Since these intake are not but minutely better and only in a very small range (for typical people) then just spend the $100 less and get a LS6 intake. If most people are going to take the dive to spend the money on an aftermarket intake most people just spend the extra money and get the ~15RWHP AND Torque and not just 5 or 7.
I hope this helps.
Digging the sig Travis. S.A.R. FTW!!!!
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know that Travis (Alabama Guy) is making an ls1 intake swap kit, including the modded valley tray and alt. bracket. I wanted to know if this modded valley tray would also work with the ls6 intake swap and retain DOD. If it does, I just need to find someone that is willing to mod the ls6 intake to work. Thanks.
#15
TECH Fanatic
iTrader: (3)
Join Date: Aug 2009
Location: Orlando, FL
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It should. The most you might have to do is take the plug off and extend it like this:
LS2 Swap
If anything, that intake neck might get in the way of the plug and you'd have to do that ^.
LS2 Swap
If anything, that intake neck might get in the way of the plug and you'd have to do that ^.
See Iraq WMD - Google Search.
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not going to attempt to bypass the rules of the site and solicit without being a sponsor. I am not peddling a product or a service here. You'll have to use other resources to find what you're looking for. I'm sorry I can't be any more help but it's not worth it. Rules are there for a reason and sponsors pay good money to advertise here. Money that I don't have.
#20
TECH Fanatic
iTrader: (3)
Join Date: Aug 2009
Location: Orlando, FL
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not going to attempt to bypass the rules of the site and solicit without being a sponsor. I am not peddling a product or a service here. You'll have to use other resources to find what you're looking for. I'm sorry I can't be any more help but it's not worth it. Rules are there for a reason and sponsors pay good money to advertise here. Money that I don't have.
You're not breaking any rules if you post pictures of your swap with details and potential gains.
No sidekicks please.