HELP, smog reff says I need a stock air filter box?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have an LS4 (entire drive train) in my 1988 Fiero GT. It is "for now" stock.
It runs great and has no engine codes. BUT the smog reff says I cant get it certified with out a stock air box.
So if any one has one that is not needed I would like to acquire it![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I don't think he can be talked out of it, he wants to see the part numbers to verify.
It runs great and has no engine codes. BUT the smog reff says I cant get it certified with out a stock air box.
So if any one has one that is not needed I would like to acquire it
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I don't think he can be talked out of it, he wants to see the part numbers to verify.
#2
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dunno if a stock LS4 airbox will fit in there for ya... the thing is pretty big/bulky... and it goes down to a bottom tray portion that is part of it and snaps to - and in that tray are where the ecm/tcm modules would go..
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Last edited by 06MonteSS; 01-05-2011 at 04:28 PM.
#3
TECH Addict
iTrader: (15)
Join Date: Aug 2002
Location: 78°14′46″N 15°27′56″E
Posts: 2,419
Likes: 0
Received 5 Likes
on
5 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have an LS4 (entire drive train) in my 1988 Fiero GT. It is "for now" stock.
It runs great and has no engine codes. BUT the smog reff says I cant get it certified with out a stock air box.
So if any one has one that is not needed I would like to acquire it![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I don't think he can be talked out of it, he wants to see the part numbers to verify.
It runs great and has no engine codes. BUT the smog reff says I cant get it certified with out a stock air box.
So if any one has one that is not needed I would like to acquire it
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I don't think he can be talked out of it, he wants to see the part numbers to verify.
I dunno if a stock LS4 airbox will fit in there for ya... the thing is pretty big/bulky... and it goes down to a bottom tray portion that is part of it and snaps to - and in that tray are where the ecm/tcm modules would go..
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dunno if a stock LS4 airbox will fit in there for ya... the thing is pretty big/bulky... and it goes down to a bottom tray portion that is part of it and snaps to - and in that tray are where the ecm/tcm modules would go..
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
I knew they are huge. I plan to cut it to fit. I have done it before on an LX5 (3.5 quad cam V6) and they did not make a big deal about it.
How much are you willing to take to part with it?
#5
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You must be in California. Sucks, but it might be easier to just post a "request for smog" in the Western section of LS1Tech. You'll probably pay $300 for it, but it's a lot less of a hassle than cutting up your Fiero to fit a restrictive air box.
Knowing California, they would probably have a problem with your custom flow work on the air box. If it isn't obvious, he may get away with it.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Knowing California, they would probably have a problem with your custom flow work on the air box. If it isn't obvious, he may get away with it.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just go to your local NAPA , they sell exact fit air boxes... Find the one that fits and have them write it up as your specs, ex specs.
They are identical as OEM, available for just about every model
They are identical as OEM, available for just about every model
#7
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
BTW off topic a little bit, I found out that there is not a single cone style air filter that is legal in CA no matter what box it is in. The reff has a list of "approved" EO numbered filters and K&N along with a myriad of others do not have the EO number on the cone filters.
So word to the wise, if you want to be smog legal in CA, there is no aftermarket cone filter, and I don't think the COLD AIR systems have the proper EO numbers either?
CA is cool, isnt it
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
Trending Topics
#9
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I see the one in the pic is on a V6. Do you have the V8 box? I am not even sure if they are the same, but I am sure this guy will fail it if they are different.
I knew they are huge. I plan to cut it to fit. I have done it before on an LX5 (3.5 quad cam V6) and they did not make a big deal about it.
How much are you willing to take to part with it?
I knew they are huge. I plan to cut it to fit. I have done it before on an LX5 (3.5 quad cam V6) and they did not make a big deal about it.
How much are you willing to take to part with it?
that's the same box I had on my SS v8...
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
#11
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dunno if a stock LS4 airbox will fit in there for ya... the thing is pretty big/bulky... and it goes down to a bottom tray portion that is part of it and snaps to - and in that tray are where the ecm/tcm modules would go..
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
I've still got my stock one - sitting on a shelf - that I could give ya cheap, but I had cut some holes in it for more air to get in... but it IS the stock box...
he didn't say it couldn't have holes in it
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
here's a pic of the stock airbox (no, not mine haha)... and it goes down deeper than what you can see too...
http://www.eallautos.com/Pictures/T531-H.jpg
you got room for that big black box in your car???
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#13
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
sorry... haven't checked back in a while...
yeah, I have all the parts...
takin a pic of everything.. will post it up in a few...
yeah, I have all the parts...
takin a pic of everything.. will post it up in a few...
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
#15
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
here's a pic of everything...
main/top part of the box - where the tape is, is where I have slots cut out of it for increased air.. plus the very front of it that is facing the bottom part... took that out too, so it gets air in from right behind the headlight... instead of just that little round tube they had in there originally...
then there's the bottom part of the box... which is where the ecm/tcm get mounted...
to the left, is the back part of the box that comes off so you can put in the air filter, and it is also where you mount the MAF sensor...
then, I have the stock air filter...
Also have the o-ring and screws for mounting the maf sensor to the box...
and in the middle of the o-ring is the rubber grommet that goes on the bottom of the box for mounting it to the car.... well, for the "stock" cars that it goes with, hehe...
so... that's everything.... complete setup...
just looked up the box if you were to buy it new from a genuine GM parts site (newgmparts.com), and the discounted cost for the setup is a little over $300....
so.. how's $100?? that will include the shipping and everything...
I have paypal... PM me if still interested...
thanks man...
EDIT: I just looked up Express Mail from the Post Office, and it's going to be about $40 to ship... daayuum!! heh...
.
main/top part of the box - where the tape is, is where I have slots cut out of it for increased air.. plus the very front of it that is facing the bottom part... took that out too, so it gets air in from right behind the headlight... instead of just that little round tube they had in there originally...
then there's the bottom part of the box... which is where the ecm/tcm get mounted...
to the left, is the back part of the box that comes off so you can put in the air filter, and it is also where you mount the MAF sensor...
then, I have the stock air filter...
Also have the o-ring and screws for mounting the maf sensor to the box...
and in the middle of the o-ring is the rubber grommet that goes on the bottom of the box for mounting it to the car.... well, for the "stock" cars that it goes with, hehe...
so... that's everything.... complete setup...
just looked up the box if you were to buy it new from a genuine GM parts site (newgmparts.com), and the discounted cost for the setup is a little over $300....
so.. how's $100?? that will include the shipping and everything...
I have paypal... PM me if still interested...
thanks man...
EDIT: I just looked up Express Mail from the Post Office, and it's going to be about $40 to ship... daayuum!! heh...
.
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Last edited by 06MonteSS; 01-10-2011 at 08:29 PM. Reason: added a few more pics of it all put together...
#16
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
nothin' huh??? oh well... couldn't have been THAT important... hehe...
I'll hang on to it....
I'll hang on to it....
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
#18
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yes, I still have it... and I replied to your PM...
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com