Well I went ahead and installed my transgo shift kit this morning. It really wasn't that difficult besides a few things. So far I only noticed a small difference in the 1-2 shift and a little more from 2-3. I fould a little gunk in my trans pan it was grayish gunk on the pan. Would that be metal shavings? Then when reinstalling my trans pan with my cheap torque wrench I snapped the head off one of the trans bolts. Will it be ok missing one bolt for a little while? What can be done to fix it? Thanks guys. I will try to post pics of my trans pan later.

 

You can get an "easy out" or bolt extractor to get it out and pick up a new bolt from the bone yard or dealer. Yeah those are metal shavings which is normal, chunks are bad.

 

Thanks for the response!! You know where i can pick up an easy out? Thanks
I live in Oak Creek too.

 

Congrats for not having TCC material in your pan! That's cause for celebration!

 

Nice! you lose power last night too? I live off of 13th st and we had no power for 4 hours. You can get them at Farm and fleet, Ace and I think even the parts stores have them.

 

WOOOOO wisconsin! my power flickered but didnt go out thank god

 

Cool thanks! Yeah my power went out for about a minute and I live off 27th and Ryan. Crazy WI lol

 

I hope my pan looks that good when I drop it.

CONGRATS!