Won't start
#143
Here is the start circuit. Test with your meter and a single blub test lamp (if you don`t have a 12v test lamp simply wire up a lamp and use it)
- in fig 2 you will have to hold the key in the start to complete/confirm that part of the circuit, check as much as you can.
- notice the current sensor as it is on the + not the - be sure it is secure and the tail is pointing to the pos terminal, also make sure the wires to it are good
- in fig 2 you will have to hold the key in the start to complete/confirm that part of the circuit, check as much as you can.
- notice the current sensor as it is on the + not the - be sure it is secure and the tail is pointing to the pos terminal, also make sure the wires to it are good
Last edited by Ill_Born_ss; 03-11-2014 at 11:19 AM.
#145
TECH Enthusiast
Join Date: Dec 2012
Location: WEST PALM BEACH FL
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
I think there is a youtube video on how to make c4 Explosives you could just man i tried something someone told me to do from the forum and BOOOOOOOMMMMM
Just Saying
Just Saying
#147
The current sensor does play a big role, that little device carries a big stick. From under charging to over charging to shutting things down by 10% to completely shutting things down or even from ever starting up. It CONTROLS... electric power management. I believe I posted a link earlier.