Anyone have this happen before??
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Anyone have this happen before?? So went in a friends for twenty min. Came out to leave, started my car.. check engine light! !.. now remote start won't work.. I searched this and found ALLLLL sorts of ppl having this happen but I can't seem to find what exactly it is..
Gna take it to dealer in a few hours but its bugging me.. what is it?????
Gna take it to dealer in a few hours but its bugging me.. what is it?????
TECH Enthusiast
Joined: Nov 2008
Posts: 622
Likes: 1
Built in safety feature is if the check engine is on remote is automatically disabled or if the hood is open.
Before you go to the dealer to get raped, just use a scanner to get the codes or stop at a local parts store and have them scan for the codes and list them here. At the least someone can tell you where to go... direction wise!
Before you go to the dealer to get raped, just use a scanner to get the codes or stop at a local parts store and have them scan for the codes and list them here. At the least someone can tell you where to go... direction wise!
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Built in safety feature is if the check engine is on remote is automatically disabled or if the hood is open.
Before you go to the dealer to get raped, just use a scanner to get the codes or stop at a local parts store and have them scan for the codes and list them here. At the least someone can tell you where to go... direction wise!
Before you go to the dealer to get raped, just use a scanner to get the codes or stop at a local parts store and have them scan for the codes and list them here. At the least someone can tell you where to go... direction wise!
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
The way it acted I thought the light had something to do with remote starter.. but really didn't make sense to me..
That and shorty after posting this I was driving and the car spuddered when I pushed the gas.. so guessing maybe maf sensor maybe tps?? Not sure?? I'm no mechanic by any means
That and shorty after posting this I was driving and the car spuddered when I pushed the gas.. so guessing maybe maf sensor maybe tps?? Not sure?? I'm no mechanic by any means
Teching In
Joined: Nov 2012
Posts: 34
Likes: 0
The way it acted I thought the light had something to do with remote starter.. but really didn't make sense to me..
That and shorty after posting this I was driving and the car spuddered when I pushed the gas.. so guessing maybe maf sensor maybe tps?? Not sure?? I'm no mechanic by any means
That and shorty after posting this I was driving and the car spuddered when I pushed the gas.. so guessing maybe maf sensor maybe tps?? Not sure?? I'm no mechanic by any means
Matt,
GM Customer Assistance
Trending Topics
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Hey thanks matt.. I got some advice I'm going to try.. I fellow member says 2 o2s should never go at the same time.. something to do with the cold and the charge system.. told me to clear the codes amd trickle charge the battery over niggt and try that.. save me the 150 I spent on o2s.. as for evap its easier to replace tjan I thought. . No dropping the tank.. remove wheel and plastic in the well and poof there she is.. replace her and be on my way
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Yeah, evap is very easy to replace and pretty cheap. That was what started throwing an intermittent light on mine causing the remote start to stop working. Took a while, but it eventually became a pretty constant light that would come back nearly immediately after clearing it.
Replaced the solenoid in the back and haven't had an issue since.
Replaced the solenoid in the back and haven't had an issue since.
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Yeah, evap is very easy to replace and pretty cheap. That was what started throwing an intermittent light on mine causing the remote start to stop working. Took a while, but it eventually became a pretty constant light that would come back nearly immediately after clearing it.
Replaced the solenoid in the back and haven't had an issue since.
Replaced the solenoid in the back and haven't had an issue since.
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Called and got it ordered.. 31 bucks.. but there was a valve too for 80.. the code reads valve c.. so I'm lost.. hopefully just rhe solenoid does the trick.. but I'm gna be mad I put the 30 in and its the 80 dollar part.. cause in.all rwality at the gas station.my car doesn't make the pump keep stopping like most ppl having a evap problem.. so its weird.. hate engine light on the dash being on so I just want to replace it
TECH Enthusiast
Joined: Nov 2008
Posts: 622
Likes: 1
What Code # reads.." valve c" and what P/N did you order. these solenoid valves are multifunction, they do some things open and some things closed and they can be plugged. Could even be because of the gas cap leaking. Sometimes you may clear the light and it may take up to 3 driving cycles for the system to stabilise.
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
What Code # reads.." valve c" and what P/N did you order. these solenoid valves are multifunction, they do some things open and some things closed and they can be plugged. Could even be because of the gas cap leaking. Sometimes you may clear the light and it may take up to 3 driving cycles for the system to stabilise.
Word for word
And yes my gas cap is garbage.. Hard to get on. One day I didn't secure it right and I got the gas cap warning..
So can I manually purge this.. How do I do this clearing of the lines? Just drive.?
TECH Enthusiast
Joined: Nov 2008
Posts: 622
Likes: 1
So you charged the battery! Then cleared all the codes with the key on, engine off. Then turned key off for 30 seconds then started the car. Did the check engine light go out and stay out? Or did it come on again with new codes! If your gas cap if fubared replace it with an OEM one as it is an important part of your emission system.
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
No havent done it yet.. bought the charger.. but haven't had time to do it.. I live in an apt complex and can't just run a extension cord haha.. got an appointment to get the tint banner on my windsheid but think I'm gonna do it right after while I sleep.. just hope 7-8 hrs is enogh time for a 2amp trickle charge.. I work third shift so I can't leave it overnight. . Ill be sure to post my findings once I do it tho
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
So you charged the battery! Then cleared all the codes with the key on, engine off. Then turned key off for 30 seconds then started the car. Did the check engine light go out and stay out? Or did it come on again with new codes! If your gas cap if fubared replace it with an OEM one as it is an important part of your emission system.
I have got thay charhing system failure warning a couple times in the last year so I'm hoping this is it.. battery doesn't look too new.. doesn't help I have a pretty beefy sound system :/
TECH Enthusiast
Joined: Nov 2008
Posts: 622
Likes: 1
Do you have your glove box manual for the car?
If not go here and download it:
http://www.gm.ca/media/owners/manual...nual_en_CA.pdf
If you do go to page 5-122 and check the fuse marked CANISTER (passenger side kick panel)
Also go to page 5-126 and check the Emissions 1 and Emissions 2 fuses
Also do you have any mods , cold air intake, exhaust
Also can you tell me what scan tool you are using to clear the codes.
If not go here and download it:
http://www.gm.ca/media/owners/manual...nual_en_CA.pdf
If you do go to page 5-122 and check the fuse marked CANISTER (passenger side kick panel)
Also go to page 5-126 and check the Emissions 1 and Emissions 2 fuses
Also do you have any mods , cold air intake, exhaust
Also can you tell me what scan tool you are using to clear the codes.
Last edited by Ill_Born_ss; Feb 10, 2013 at 07:18 AM.
Thread Starter
On The Tree
Joined: Mar 2012
Posts: 138
Likes: 0
From: peoria il
Do you have your glove box manual for the car?
If not go here and download it:
http://www.gm.ca/media/owners/manual...nual_en_CA.pdf
If you do go to page 5-122 and check the fuse marked CANISTER (passenger side kick panel)
Also go to page 5-126 and check the Emissions 1 and Emissions 2 fuses
Also do you have any mods , cold air intake, exhaust
Also can you tell me what scan tool you are using to clear the codes.
If not go here and download it:
http://www.gm.ca/media/owners/manual...nual_en_CA.pdf
If you do go to page 5-122 and check the fuse marked CANISTER (passenger side kick panel)
Also go to page 5-126 and check the Emissions 1 and Emissions 2 fuses
Also do you have any mods , cold air intake, exhaust
Also can you tell me what scan tool you are using to clear the codes.
