08 pimpala ss

Could someone post where I need to pin the ecu for second iat

08 pimpala ss

Thanks for the input

spawne32

iTrader: (2)

lol i tried to locate ecu pinouts for the LSA or LS9 but came up short, i dont have access to service manuals either.

91parkave

iTrader: (4)

08 pimpala ss

Ok sweet I'm going to get that done now how do I turn it on?

91parkave

iTrader: (4)

I'll have to take a loom at my laptop later and play around

spawne32

iTrader: (2)

thats a good question, your not fitted with a SC, your turbo, so you just want the IAT2 to read. The parameters for the IAT2 are already programmed in, not sure that it has to be "turned on" necessarily, just that the ECU really wont use it for anything.

You maybe able to use the SC "fitted" to activate the IAT2 torque management settings and then program just to use spark cut based on IAT2 readings. Enabling the DTC's for IAT Sensor 2 may also help you out.

91parkave

iTrader: (4)

Also check under os and engine diag to verify.

08 pimpala ss

Thanks a bunch everyone