rez delete - stock exhaust.. done!
#1
On The Tree
Thread Starter
rez delete - stock exhaust.. done!
just got back from the shop. $70 for the pipe welded in place of the rez and a oil change. not too bad.. and the shoud is much better. not too loud but you can for sure tell a difference. had the guy that did the job "a good friend" go up the road so i could hear it.. souds good. a bit louder and sounds like a V8 now. for sure a good cheap mod. maybe in the future i will replace the mufflers but for now i'm happy..
#2
LS1Tech Sponsor
get any drone inside??
that's what I'm thinking of doing.. get the resonator/u-bend removed and put on a pair of flowmasters - keeping the stock piping.
that's what I'm thinking of doing.. get the resonator/u-bend removed and put on a pair of flowmasters - keeping the stock piping.
__________________
06MonteSS / DiabLew Tune
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
#3
On The Tree
Thread Starter
Originally Posted by 06MonteSS
get any drone inside??
that's what I'm thinking of doing.. get the resonator/u-bend removed and put on a pair of flowmasters - keeping the stock piping.
that's what I'm thinking of doing.. get the resonator/u-bend removed and put on a pair of flowmasters - keeping the stock piping.
#6
On The Tree
Join Date: Apr 2007
Location: st. joe mo.
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Im running flowmaster 40's and just today had the rez replaced, I thought it would be way to loud for the wife anyway, but she loved it. No down pipe yet that I know of.
Trending Topics
#8
TECH Addict
iTrader: (3)
Join Date: May 2006
Location: Buffalo, NY
Posts: 2,421
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Canada52
What size pipe is it?
Does anyone make a downpipe yet?
Does anyone make a downpipe yet?
#9
On The Tree
Thread Starter
UPDATE: been almost one week since i got the rez hacked out. still love it. the sound is so much better than stock. I have noticed that at WOT it's not all that loud. just a bit more than stock. but at low RPM, like around town it is way louder and much deeper tone. just what i wanted.
#12
TECH Enthusiast
iTrader: (2)
Join Date: Sep 2006
Location: Eastern Iowa
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
You will see negative gains without a tune. . . you can't shove more air in and out of the motor without tricking the motor into thinking its running lean/rich. Either way you will suffer, a tune is a neccessity with most mods.
#16
There are a couple of places that will do a PCM tune (meaning you pull the PCM out of your car, ship it to them, they tune it and send it back - or they can do it in the car if you are located close). That is around $400 or so. But you cannot use the car while they have your PCM.
Diablo and HP Tuners both make tuners/software to tune yourself. Diablo is cheaper, but HP is more in-depth.
Tuning helps the car breathe better, improves shift points, removes speed limiter, etc, etc. (More HP and better performance). You can turn off the DoD as well.
Diablo and HP Tuners both make tuners/software to tune yourself. Diablo is cheaper, but HP is more in-depth.
Tuning helps the car breathe better, improves shift points, removes speed limiter, etc, etc. (More HP and better performance). You can turn off the DoD as well.