Stick with Tinted Tails or go Stock?
#24
TECH Addict
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Buffalo, NY
Posts: 2,421
Likes: 0
Received 0 Likes
on
0 Posts
If they're so strict in Cali about the tint that you wouldn't put any on, I'd say they're likely to mess with you. Knock on wood, I've never been bothered for them...and I've been pulled over with them on before. Once they pulled me over for my lack of a front plate and bugged me about my smoked license plate cover and my window tint, but not a word about the tails. Hell, they even let me go with just a warning, too. Respect to the officer is key...even if they ARE female
#26
TECH Addict
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Buffalo, NY
Posts: 2,421
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I put V-flags on the fenders, too (the one in my sig) but they were crappy replicas and now have no paint :roll: but that will allow me to put some fresh paint on them myself.
#29
On The Tree
iTrader: (1)
Join Date: Apr 2008
Location: Joliet, Illinois
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
You car does look sharp though. The smoked tail lights and the flags are a nice touch.
#30
TECH Addict
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Buffalo, NY
Posts: 2,421
Likes: 0
Received 0 Likes
on
0 Posts
Removing the old emblems is easy. With a heat source (sunlight & ambient heat might be enough in some cases) they should just pull off, but you can use fishing line to cut the adhesive from the rear of the emblem, and then some adhesive remover like GooGone or Goof Off to get the remaining adhesive/pad off the car. Just be sure to use a soft cloth or you'll scratch the paint to **** (I know )
#32
TECH Addict
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Buffalo, NY
Posts: 2,421
Likes: 0
Received 0 Likes
on
0 Posts
Just be careful with anything more than a hairdryer as it will soften the paint if too much heat is used and you can leave dents in the paint when prying up on the emblems.