My ambitious project
#121
TECH Senior Member
iTrader: (3)
Join Date: Oct 2006
Location: Decatur, TN (N-W of Athens)
Posts: 7,564
Likes: 0
Received 4 Likes
on
4 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yep that would be correct... a 1500 or 2500 chevy/gmc with a 5.3 or a 6.0 would be nice to mod.
heres a colorado "ss"
http://cgi.ebay.com/ebaymotors/Chevr...mZ120319502392
heres a colorado "ss"
http://cgi.ebay.com/ebaymotors/Chevr...mZ120319502392
That SS is sweet though, he did a good job on it. Wonder if the SS bumper off a Trailblazer would've worked? Drop the same motor and AWD setup off it under a Colorado... Typhoon anyone?
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#123
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well why wouldnt you just get a Z85 4x4 coly with the 5.3 and get the AWD when you want it? The Z85's look like 2wd's anyway.
This Cyclone? Good luck getting a S truck platform under this unibody ferd lololololol
![](http://www.cartersclassicmusclecars.com/images/Cyclone/Carter%20Cars%2015.JPG)
OR
This Syclone?
This Cyclone? Good luck getting a S truck platform under this unibody ferd lololololol
OR
This Syclone?
![](http://www2.uol.com.br/bestcars/carros/walpaper2/GMC_Syclone_1992_1024.jpg)
#124
TECH Regular
Join Date: Oct 2004
Location: Bay Area, CA
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So from what I understand, the issue holding back an intake swap is the oil plug for the DOD which sticks up near the TB side of the intake. Now, the LH8 that is in the 5.3L Colorado has the same motor that was used in the 5.3L Trailblazer/Rainier/Envoy minus the DOD crap. So the LH8 has a different valley cover as it doesn't have all the DOD crap. Theoretically, is it possible to remove some of the DOD items, plug up whatever oil lines, use the LH8 valley cover and be able to use any other LSx intake? Did that make sense? lol.
#125
LS1Tech Sponsor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
don't think it'd be that easy...
here's the DOD info... https://ls1tech.com/forums/showpost....27&postcount=3
here's the DOD info... https://ls1tech.com/forums/showpost....27&postcount=3
__________________
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
06MonteSS / DiabLew Tune
![](https://ls1tech.com/forums/signaturepics/sigpic53380_2.gif)
2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
#126
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So from what I understand, the issue holding back an intake swap is the oil plug for the DOD which sticks up near the TB side of the intake. Now, the LH8 that is in the 5.3L Colorado has the same motor that was used in the 5.3L Trailblazer/Rainier/Envoy minus the DOD crap. So the LH8 has a different valley cover as it doesn't have all the DOD crap. Theoretically, is it possible to remove some of the DOD items, plug up whatever oil lines, use the LH8 valley cover and be able to use any other LSx intake? Did that make sense? lol.
#128
On The Tree
Join Date: Aug 2007
Location: Austin Tx.
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
alright ya'll got the dyno run in ect
after 6 pulls she put down 278whp and 263tq, was pretty heat soaked at this point so true hp numbers weren't showing. IAT where at 178, ECT where in the high 220's-low 230's so he estimates actually HP numbers to be about 10-15 more than what the dyno showed due to heat soak. The guy also didn't get the shift point set right in my mind, I wanted 1-2@6750 2-3@6500 3-D@5500 but car kept shifting at 6100, I think he just forgot to set the transmission shift parameters. Every time it shifted out at 6100 that was peak HP point. I think the cam will be good to 6300-6400 if not more before the HP curve begins to fall off some so I will mess with it later on.
if you just want dyno part of the vid skip to 6:17, other than that this is just a vid of everything put together from start to finish on this project.
http://www.youtube.com/watch?v=j2VJR8me-jw
after 6 pulls she put down 278whp and 263tq, was pretty heat soaked at this point so true hp numbers weren't showing. IAT where at 178, ECT where in the high 220's-low 230's so he estimates actually HP numbers to be about 10-15 more than what the dyno showed due to heat soak. The guy also didn't get the shift point set right in my mind, I wanted 1-2@6750 2-3@6500 3-D@5500 but car kept shifting at 6100, I think he just forgot to set the transmission shift parameters. Every time it shifted out at 6100 that was peak HP point. I think the cam will be good to 6300-6400 if not more before the HP curve begins to fall off some so I will mess with it later on.
if you just want dyno part of the vid skip to 6:17, other than that this is just a vid of everything put together from start to finish on this project.
http://www.youtube.com/watch?v=j2VJR8me-jw
#129
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
alright ya'll got the dyno run in ect
after 6 pulls she put down 278whp and 263tq, was pretty heat soaked at this point so true hp numbers weren't showing. IAT where at 178, ECT where in the high 220's-low 230's so he estimates actually HP numbers to be about 10-15 more than what the dyno showed due to heat soak. The guy also didn't get the shift point set right in my mind, I wanted 1-2@6750 2-3@6500 3-D@5500 but car kept shifting at 6100, I think he just forgot to set the transmission shift parameters. Every time it shifted out at 6100 that was peak HP point. I think the cam will be good to 6300-6400 if not more before the HP curve begins to fall off some so I will mess with it later on.
if you just want dyno part of the vid skip to 6:17, other than that this is just a vid of everything put together from start to finish on this project.
http://www.youtube.com/watch?v=j2VJR8me-jw
after 6 pulls she put down 278whp and 263tq, was pretty heat soaked at this point so true hp numbers weren't showing. IAT where at 178, ECT where in the high 220's-low 230's so he estimates actually HP numbers to be about 10-15 more than what the dyno showed due to heat soak. The guy also didn't get the shift point set right in my mind, I wanted 1-2@6750 2-3@6500 3-D@5500 but car kept shifting at 6100, I think he just forgot to set the transmission shift parameters. Every time it shifted out at 6100 that was peak HP point. I think the cam will be good to 6300-6400 if not more before the HP curve begins to fall off some so I will mess with it later on.
if you just want dyno part of the vid skip to 6:17, other than that this is just a vid of everything put together from start to finish on this project.
http://www.youtube.com/watch?v=j2VJR8me-jw
#130
On The Tree
Join Date: Aug 2007
Location: Austin Tx.
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
#135
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
fresh off the cam:
http://www.youtube.com/watch?v=hPxjJP311Ao
http://www.youtube.com/watch?v=EBwYYboWkfs
Very little in the way of mods anymore, stock valvetrain aside from 918 springs. Catless DP, my HPT tune and modified stock airbox and filter.
http://www.youtube.com/watch?v=hPxjJP311Ao
http://www.youtube.com/watch?v=EBwYYboWkfs
Very little in the way of mods anymore, stock valvetrain aside from 918 springs. Catless DP, my HPT tune and modified stock airbox and filter.
#136
On The Tree
Join Date: Aug 2007
Location: Austin Tx.
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'll try and get some higher speed runs later tonight kidna busy atm and gotta run over to a friends house, no good roads to do these kinda speeds at going there
I'll try to also get my launch a little better I keep loosing grip anything less than 30-40 and sometimes even then depending on patch of road I'm on.
edit did you ever get your dod noise issue figured out or just turn it back off?
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
edit did you ever get your dod noise issue figured out or just turn it back off?
#137
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'll try and get some higher speed runs later tonight kidna busy atm and gotta run over to a friends house, no good roads to do these kinda speeds at going there
I'll try to also get my launch a little better I keep loosing grip anything less than 30-40 and sometimes even then depending on patch of road I'm on.
edit did you ever get your dod noise issue figured out or just turn it back off?
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
edit did you ever get your dod noise issue figured out or just turn it back off?
#138
On The Tree
iTrader: (1)
Join Date: Jan 2009
Location: Hope Mills, NC
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is an 01' LS6 cam, so it has only .525" lift. that comes to .556" at the valve with a 1.8 rocker.
The DOD lifters only cares about the lift at the cam. Because when the lifter "free wheels" for lack of better words, its gonna depend on how much free travel the lifter has to whether it can accomodate the added lift. So if the lifters can take the added .046" in lift internally the system should operate the same.
I want to correct the pushrod length issue first before i kick the DOD back on.
Amazing how much of a bump in instant fuel econ at a cruising speed in V8 mode between the 2 cams, i cant wait to see what it does with the DOD working.
The DOD lifters only cares about the lift at the cam. Because when the lifter "free wheels" for lack of better words, its gonna depend on how much free travel the lifter has to whether it can accomodate the added lift. So if the lifters can take the added .046" in lift internally the system should operate the same.
I want to correct the pushrod length issue first before i kick the DOD back on.
Amazing how much of a bump in instant fuel econ at a cruising speed in V8 mode between the 2 cams, i cant wait to see what it does with the DOD working.
What is the total lifter travel for a DOD set at zero lash?