FI custom comp grind cam (new)
10-18-2008, 08:00 PM
#1
10 Second Club
Thread Starter
iTrader: (37)
Join Date: Jan 2004
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
FI custom comp grind cam (new) SOLD!
This cam has never been run. It is perfect for a turbo application.
Specs:
Serial # A 4636 Spec Card# 045764
> Part # 54-000-11 CAMSHAFT, LS1 CHEVY LS1/GEN III '97-UP
> Core C54-11H CAMSHAFT BLANK, LS1 1997 UP 5.7 CORVETTE
> Grind # LS1 3714R /3714R HR114.0
> DURATION @ .050 INTAKE 222 ROCKER ARM RATIO
> VALVE ADJ INTAKE .000 DURATION @ .050 EXHAUST 222 INTAKE 1.70
> VALVE ADJ EXHAUST .000 LOBE LIFT INTAKE .3330 EXHAUST 1.70
> VALVE LIFT INTAKE .566 LOBE LIFT EXHAUST .3330
> VALVE LIFT EXHAUST .566 LOBE SEPARATION 114.0
> DURATION .006 INTAKE C/L 110.0
> TAPPET LIFT INTAKE 275 CAM ADVANCE 4
> TAPPET LIFT EXHAUST 275 HYDRAULIC Y
> VALVE TIMING .050 OVERHEAD CAM N
> VALVE OPEN INTAKE 1 JOURNAL DIAMETER STD 2.165
> VALVE OPEN EXHAUST 49 RECOMMENDED VALVE SPRINGS
> VALVE CLOSED INTAKE 41 DEPARTMENT P
> VALVE CLOSED EXHAUST 7- SPC INSTR FOR CUSTOMER
SOLD!
Last edited by rufretic; 10-24-2008 at 10:02 PM.
10-22-2008, 11:04 AM
#5
10 Second Club
Thread Starter
iTrader: (37)
Join Date: Jan 2004
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
Cam is back up for sale, I had the wrong specs before. I'm refunding the original buyer because he is going with a n/a set-up. This cam is made specifically for a turbo application.
