96lb injectors, speed inc fuel rails, YT ultralight rockers, Meziere EWP, TR 7.4 push
#1
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
96lb injectors, speed inc fuel rails, YT ultralight rockers, Meziere EWP, TR 7.4 push
Got a whole bunch of stuff fur sale but I'll start with some small stuff first. Paypal is OK on this but add the 3%. All prices are plus shipping and i'm pretty firm on the prices.
8 Delphi 96lb low impedance injectors (car), less than 6 months old and no street miles or crappy fuel, c-16 only. SOLD
Speed in fuel rails, -8 crossover in the rear, -8 inlet on front drivers side and -6 outlet for return on pass side front. SOLD
YT 1.7 ultralight LS1/2/6 rockers, on the car for exactly five passes, as new as you can get. SOLD
Meziere 'street' electric water pump for LS1, part number WP319S I believe, very good shape. Leaked a little and I sent it back to Meziere and the rebuilt it under warranty - been fine since. SOLD
Thunder racing 7.400 hardened pushrods, not a lot of miles, race car only with a small cam. SOLD
I can take pics if needed.
8 Delphi 96lb low impedance injectors (car), less than 6 months old and no street miles or crappy fuel, c-16 only. SOLD
Speed in fuel rails, -8 crossover in the rear, -8 inlet on front drivers side and -6 outlet for return on pass side front. SOLD
YT 1.7 ultralight LS1/2/6 rockers, on the car for exactly five passes, as new as you can get. SOLD
Meziere 'street' electric water pump for LS1, part number WP319S I believe, very good shape. Leaked a little and I sent it back to Meziere and the rebuilt it under warranty - been fine since. SOLD
Thunder racing 7.400 hardened pushrods, not a lot of miles, race car only with a small cam. SOLD
I can take pics if needed.
Last edited by kp; 12-12-2008 at 12:02 PM.
#3
Where did the waterpump leak from? How long ago was it fixed? Can you shoot me some pics r_bishop64@hotmail.com Very interested.
Thanks!
Thanks!
#5
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Where did the waterpump leak from? How long ago was it fixed? Can you shoot me some pics r_bishop64@hotmail.com Very interested.
Thanks!
Thanks!
I'm going to post pics of everything soon.
#7
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Added pics, the water pump is black and in pretty good shape.
The fuel rails are for an LS1/LS6 as well as the injectors. I have no idea if they fit LS7/L92/LS2/LS3 etc.
The injectors are low impedance, they will NOT work with a stock PCM, you will need an injector driver or aftermarket ECU that can drive low-z injectors.
The fuel rails are for an LS1/LS6 as well as the injectors. I have no idea if they fit LS7/L92/LS2/LS3 etc.
The injectors are low impedance, they will NOT work with a stock PCM, you will need an injector driver or aftermarket ECU that can drive low-z injectors.