317s and Synergy 2 step and Mahle pistons
#1
TECH Regular
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
317s and Synergy 2 step and Mahle pistons
I have a used set of 317s (not sure of mileage) I had them checked at my machine shop and the were given a clean bill of health. All seals checked and pressure tested fine. These will come with the latest version of the comp 918 valve springs w/ titanium retainers. Springs have less than 2k miles on them.
The springs were installed with a zo6 cam and the rev limiter was set to 6400, So no abuse.
300.00 shipped
LPE window switch RPM-001 New 105.00 plus shipping 85.00
NX Bottle heater 125.00
Synergy 2Step/Window Switch All in one New Never installed 275.00
Mahle 3.905 w/-4ccc valve reliefs 2k miles 400.00 obo
Stock rear w/Slp girdle no brakes 3.42 gears from 2000 ss 50k miles 150.00 plus shipping.
SStock 50k mile aluminum driveshaft 125.00 shipped
Eaton 3 series posi less than 500 miles 350 shipped obo.
Yukon 28 spline axles less than 500 miles 200.00 shipped.
Paypal accepted.
Doug
The springs were installed with a zo6 cam and the rev limiter was set to 6400, So no abuse.
300.00 shipped
LPE window switch RPM-001 New 105.00 plus shipping 85.00
NX Bottle heater 125.00
Synergy 2Step/Window Switch All in one New Never installed 275.00
Mahle 3.905 w/-4ccc valve reliefs 2k miles 400.00 obo
Stock rear w/Slp girdle no brakes 3.42 gears from 2000 ss 50k miles 150.00 plus shipping.
SStock 50k mile aluminum driveshaft 125.00 shipped
Eaton 3 series posi less than 500 miles 350 shipped obo.
Yukon 28 spline axles less than 500 miles 200.00 shipped.
Paypal accepted.
Doug
Last edited by 98catfish; 11-14-2008 at 05:34 PM.