ALLPRO LSW heads w Jesel Mohawks f/s
#1
ALLPRO LSW heads w Jesel Mohawks f/s
These Heads were purchased from "West Coast Cylinder Head" for roughly $6700.00 with the Jesel Mohawks 1.8 complete. Off my failed 427 project.
The heads are essentially new since the cleanup from WCCH and have the same extremely low hours on them as the Jesels
Here are the specs:
-12 degree w/ 57.2cc Chambers
-Intake Runner:275cc
-Exhaust Runner:100cc
-Valve Size: Intake-2.180(Titanium) / Exhaust-1.600(Stainless)
-Surface Mill: .010"
-Valve Springs: Dual w/ Damper
-Diameter: 1.550"
-Seat Pressure:175lbs
-Open Pressure:460lbs
-Max Lift .690.
Send email addy for pics and flow sheet.
Priced to sell at $3450.00 here until Dec 7 when they go up and with the rest of my GOFAST parts to Pomona(LA) Swap Meet.
Ed
The heads are essentially new since the cleanup from WCCH and have the same extremely low hours on them as the Jesels
Here are the specs:
-12 degree w/ 57.2cc Chambers
-Intake Runner:275cc
-Exhaust Runner:100cc
-Valve Size: Intake-2.180(Titanium) / Exhaust-1.600(Stainless)
-Surface Mill: .010"
-Valve Springs: Dual w/ Damper
-Diameter: 1.550"
-Seat Pressure:175lbs
-Open Pressure:460lbs
-Max Lift .690.
Send email addy for pics and flow sheet.
Priced to sell at $3450.00 here until Dec 7 when they go up and with the rest of my GOFAST parts to Pomona(LA) Swap Meet.
Ed
Last edited by americanmusl; 12-01-2008 at 08:59 PM.
#4
#6
#7
TECH Fanatic
iTrader: (16)
Join Date: Oct 2003
Location: Ruffin,N.C.
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
paintedlovefarm@yahoo.com will you sell just the heads without the rockers, or do these heads require those rockers...thanks
Trending Topics
#8
OWN3D BY MY PROF!
iTrader: (176)
BeaflagVonRathburg@lsxextreme.com . They require those rockers. Since you mentioned a swap meet are you interested in any trades?
#9
paintedlovefarm@yahoo.com will you sell just the heads without the rockers, or do these heads require those rockers...thanks
Do you still want the pics?
Ed
#10
BeaflagVonRathburg@lsxextreme.com . They require those rockers. Since you mentioned a swap meet are you interested in any trades?
Do you still want the pics?
Ed
#19