Complete LS1, 4L60E, F13, 243 castings, 3600 Stall, headers..much more...read
12-03-2008, 11:25 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Complete LS1, 4L60E, F13, 243 castings, 3600 Stall, headers..much more...read Pictures: https://ls1tech.com/forums/album.php?albumid=1179
Hello all...I took a day off work today because of an illness so I thought I would post up my thread now and get it out there. I don't have pictures here on this computer, but I will be updating my thread this weekend when I get to the computer with pictures. Since disassembly, I have painted many portions of the motor (intake, valve covers, TB, and such a gloss black which gives a nice sleek look). So read on and read carefully...there are a lot of parts at stake here and this is a very good engine to have for any street rod.. and trust me, feel free to check back in a bit to scope out my pictures....and in the meantime, here's this setup at idle:
http://www.youtube.com/watch?v=tskKVcOuApQ
Here's the deal..I will sell this one of many ways. Motor complete with transmission, or motor minus heads with transmission, or if you want strictly transmission you will have to send me a message and we will talk. I want to try and sell all at once, so I will hold off on offers for a bit. Since building this motor, there has been approximately 1500 miles.
Engine:
LS1
49,xxx miles
smoothed runners 243 LS6 heads
F13 camshaft 230/232 .585/.595 lift 114lsa
LS6 Intake Manifold
Pacesetter Long Tube Headers, I can throw in the Y, but I think I cut it off taking it apart...Can't remember
ARP Headbolts
Chromemoly pushrods
Comp Cam 918 springs
Titanium Locks and Retainers
FelPro 1041 Head gaskets
JE Double Roller Timing Chain
LS6 Oil Pump
Radiator with fans accompanied with some hoses
Volant Air Induction
Stock Lifters
Stock fuel rails, injectors
Oil Pan
Water Pump
160 degree Thermostat
Coil packs
spark plug boots, note: spark plugs non included
Transmission:
TCI 3600 Stall
Stock 4L60E. No slippage in this transmission.
You also get the Driveshaft if you would like it as well!!!
If I get over the sickness I may be able to pull off the whole rear end this weekend, which has some 4.10s in it...if you are interested in that, give me a message or call.
Overall, for everything, I will be asking $3800 plus shipping (feel free to come look and inspect and take her home yourself for no shipping). If close to me, I can drive a certain distance...give me a call or msg and talk to me bout that. I run royal purple in this motor since build and will not run anything else. I do ask that the buyer continues with the same maintainance...by running royal purple and changing oil each 2200 miles (even though I never got to 2200 miles). My phone num is 330-447-1738 and my name is Shane. I will probably not pick up on the first call bc I won't know the number, so call me two times in a row and i'll pick up the second time knowing its about this. Msg me if you would like to know some of the things I will not be including: Most of these items are simply
Hello all...I took a day off work today because of an illness so I thought I would post up my thread now and get it out there. I don't have pictures here on this computer, but I will be updating my thread this weekend when I get to the computer with pictures. Since disassembly, I have painted many portions of the motor (intake, valve covers, TB, and such a gloss black which gives a nice sleek look). So read on and read carefully...there are a lot of parts at stake here and this is a very good engine to have for any street rod.. and trust me, feel free to check back in a bit to scope out my pictures....and in the meantime, here's this setup at idle:
http://www.youtube.com/watch?v=tskKVcOuApQ
Here's the deal..I will sell this one of many ways. Motor complete with transmission, or motor minus heads with transmission, or if you want strictly transmission you will have to send me a message and we will talk. I want to try and sell all at once, so I will hold off on offers for a bit. Since building this motor, there has been approximately 1500 miles.
Engine:
LS1
49,xxx miles
smoothed runners 243 LS6 heads
F13 camshaft 230/232 .585/.595 lift 114lsa
LS6 Intake Manifold
Pacesetter Long Tube Headers, I can throw in the Y, but I think I cut it off taking it apart...Can't remember
ARP Headbolts
Chromemoly pushrods
Comp Cam 918 springs
Titanium Locks and Retainers
FelPro 1041 Head gaskets
JE Double Roller Timing Chain
LS6 Oil Pump
Radiator with fans accompanied with some hoses
Volant Air Induction
Stock Lifters
Stock fuel rails, injectors
Oil Pan
Water Pump
160 degree Thermostat
Coil packs
spark plug boots, note: spark plugs non included
Transmission:
TCI 3600 Stall
Stock 4L60E. No slippage in this transmission.
You also get the Driveshaft if you would like it as well!!!
If I get over the sickness I may be able to pull off the whole rear end this weekend, which has some 4.10s in it...if you are interested in that, give me a message or call.
Overall, for everything, I will be asking $3800 plus shipping (feel free to come look and inspect and take her home yourself for no shipping). If close to me, I can drive a certain distance...give me a call or msg and talk to me bout that. I run royal purple in this motor since build and will not run anything else. I do ask that the buyer continues with the same maintainance...by running royal purple and changing oil each 2200 miles (even though I never got to 2200 miles). My phone num is 330-447-1738 and my name is Shane. I will probably not pick up on the first call bc I won't know the number, so call me two times in a row and i'll pick up the second time knowing its about this. Msg me if you would like to know some of the things I will not be including: Most of these items are simply
Last edited by bowe1632; 12-13-2008 at 09:04 PM.
Sweet setup man. Best of luck on the sale.
12-05-2008, 08:39 AM
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
I will eventually give in and separate some things if I can not get a buyer, but I do want to give this a chance as far as trying to sell everything together. I will msg you guys at that point and if you have yet to make your purchases elsewhere i'd be happy to do business with u.
12-05-2008, 08:38 PM
#7
11 Second Club
iTrader: (14)
Join Date: Aug 2008
Location: Hendersonville TN
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
It looks like everything is spoken for except the short block and that is what I need with that cam. I would like your price on that with no covers if you decide to separate please.
Trending Topics
12-05-2008, 11:31 PM
#8
I will eventually give in and separate some things if I can not get a buyer, but I do want to give this a chance as far as trying to sell everything together. I will msg you guys at that point and if you have yet to make your purchases elsewhere i'd be happy to do business with u.
12-07-2008, 10:16 PM
#15
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Hey man hows it going, I was wondering what you'd want for the entire engine with the headers!.... Without the transmission or anything else.
PM or post back here.
Thanks man
James
PM or post back here.
Thanks man
James
