(1) REPAIRED 215CC Trick Flow cylinder head GenX CNC ported
#44
Thread Starter
11 Second Club
iTrader: (19)
Joined: Jan 2007
Posts: 1,349
Likes: 3
From: Doylestown, Pa
New pics
Here are some more pics as per request.
I have numbered all of the intake ports in the following pics which help to describe the following:
Below two pics are the repaired ports
The rest of the pics show that none of the intake ports were touched and therefore needed NO repair
I have numbered all of the pushrods holes in the following pics which help to describe the following:
The following pic shows that #2 hole was machined and is now repaired.
The following pic show that #4 hole was machined and now repaired.
The rest of the pics show that non of the pushrod holes were touched and therefore needed NO repair
Here are some more pics as per request.
I have numbered all of the intake ports in the following pics which help to describe the following:
Below two pics are the repaired ports
The rest of the pics show that none of the intake ports were touched and therefore needed NO repair
I have numbered all of the pushrods holes in the following pics which help to describe the following:
The following pic shows that #2 hole was machined and is now repaired.
The following pic show that #4 hole was machined and now repaired.
The rest of the pics show that non of the pushrod holes were touched and therefore needed NO repair
#45
Thread Starter
11 Second Club
iTrader: (19)
Joined: Jan 2007
Posts: 1,349
Likes: 3
From: Doylestown, Pa
Here is the "before" dyno graph. It is kind of hard to read but just look at the curves. The car had stock heads, stock cam, and a baby P1SC.
BEFORE
Here is the "after" graph. All I did was add the TFS heads and gained 60 rwhp! It was still making power but we shut it down at 6K
AFTER
BEFORE
Here is the "after" graph. All I did was add the TFS heads and gained 60 rwhp! It was still making power but we shut it down at 6K
AFTER
#49
Brandon is a great guy to deal with! Fast shipping and the cylinder head was way better than the pix could show!! My engine builder was impressed with it!! Thanks again, this is really gonna save me money in the long run. Already have the other new TFS 215 head ordered!!!
Derek
Derek
#50
Thread Starter
11 Second Club
iTrader: (19)
Joined: Jan 2007
Posts: 1,349
Likes: 3
From: Doylestown, Pa
Brandon is a great guy to deal with! Fast shipping and the cylinder head was way better than the pix could show!! My engine builder was impressed with it!! Thanks again, this is really gonna save me money in the long run. Already have the other new TFS 215 head ordered!!!
Derek
Derek