Pacesetter headers approx(3k miles on them) with brand new pacesetter Ypipe 350.00. Prefer to be picked up but can ship.
Brand new SLP lid with holes drilled on each side(was planning on running a dry kit). SOLD
More parts to be posted soon all parts can have pics upon request...
Brand new ARP rodbolts 70 shipped.
6.0L block has some rust would work great for a block you want machined for a 370" or 408" 150$.
6.0L heads I bought then off of tech from a guy who started porting them. I had planned on getting then machined(finish porting,valve job, and milled). But never did 100$.
Stock LS1 MAF 70$ shipped.
Stock ported polished TB from LS1. 75$ shipped.
Stock 4L60e 80k miles worked great when pulled SOLD
LS1 Alternator 80k miles 75$
LS1 starter 80k miles 75$
Also have rear and front seals,valve cover gaksets, 4.00 bore stock headgaskets and head bolts. Make an offer.
LS1 computer and harness out of auto 98 Z28. I'm going to have to look up what they are going for until then make an offer!
The block is pending to Burton but gitsum is next in line.
More parts I found today
Stock ls1 fuel rail 50$
Stock ls1 oilpump 38k 50$
stock rocker arms and stands 50$
Stock 98 flywheel 75$
Stock 98 ls1 coilpacks 80k 150$
Stock power steering pump 80k 75$
Also have almost every sensor as well PM or ask for price.
Front and Rear covers 100$ for both plus shipping. Or 60$ each plus shipping.
Brand New square K&N air filter replaces the paper one. 35$ shipped.

I have a few other parts so if you need something ask I might have it. Will also trade for DSM parts such as dsmlink,injectors,etc. Most prices are BO as well.

 

I'll take the rod bolts if they are the ARP2000's.

 

Rodbolts sold.
Also adding brand new set of 4.00 bore pbm rings for 100$

 

Trans is SOLD

 

Water pump? better price on ps

 

Where are you located.. I am interested in the headers and y. My zip is 49015.

 

PM sent on the lid.

 

Waterpump is still pending I will let you know if it falls through. I could do 50 plus shipping on the powersteering.
Im located in northern kentucky..
all pms returned..

 

Any chance you have just the samll harness that connect to the coil pacs? there should be one on each side

 

I PMd you about the harnesses. And LID is sold. fuel rail and LS1 intake is pending.

 

Headers and ypipe sold.

 

Dose the TB have stops in it, who did the porting?

 

yes it does. And a friend of mine did the porting.

 

pm sent

 

Bump Bump

 

Pics of the 6.0 block to camaro2you@msn.com if you can, thanks.

 

PM sent

 

pm sent but was not replied to...??? Interested in power steering pump!

 

I sure could use the starter AND bolts if you still have them. Zip to ship is 32533

 

PM sent no reply... still interested in your TB...