NVR4GET

iTrader: (3)

These heads are off my Corvette they were ported by MTI in Houston. It cost $3,400 just to have them ported with all the parts. They are casting 853's and they flow mid 32X's at .600. I have put about 5k's mile on them since ported and the car made 531rwhp on 21 degrees of timming with a 244/244 612/612 on a 115lsa, they also made 840rwhp on a 300shot of nitrous. They have 2.08 intake valves and I cant remember the exact exhaust valve used. The springs are good for .650 lift and these heads are made for a stroker motor. I am looking for $1400 OBO +shipping. These are a great set of heads, and have proven to make great power and good track number. They are ready to ship! You must have a stroker motor to uses these heads they will not work on a stock motor!
Thanks,
Matt

dferg99

iTrader: (2)

will these work on a 6.0L 370 iron block? I have 853 casting heads now that flow 305@ 600 lift now. I'm also spraying a 250 shot of N2o.

NVR4GET

iTrader: (3)

If your motor is forged then yes the valves will clear if not, depending on the cam size you might have to flycut the pistons.

NVR4GET

iTrader: (3)

TTT For today

NVR4GET

iTrader: (3)

TTT Its OBO

NVR4GET

iTrader: (3)

PM's replyed

NVR4GET

iTrader: (3)

TTT for today

NVR4GET

iTrader: (3)

PM's replyed, price dropped to $1350 obo

NVR4GET

iTrader: (3)

TTT, Price dropped $1300 obo

NVR4GET

iTrader: (3)

TTT, These heads out flow afr heads

DGageSS

iTrader: (9)

do you have complete flow sheets, very interested, any way to find out exhaust valve size, pics?, let me know via pm or whatever looking to buy very soon.

NVR4GET

iTrader: (3)

I will get all that info today, I will have to look for the flow sheet.

NVR4GET

iTrader: (3)

Price drop $1250+ shipping also the exhaust valves are 1.6. I also have pictures if intrest pm me.
Thanks,
Matt

DGageSS

iTrader: (9)

I'm pending a sale with seller. i am awaiting pics. i have been talking to OP for about a week. looking to close the deal tonight, honestly consider them sold.