FS: the infamous set of custom DEEP DISH Fikse FM-10's

 
Thread Tools
 
Search this Thread
 
Old 08-14-2009 | 08:48 PM
  #1  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default FS: the infamous set of custom DEEP DISH Fikse FM-10's

well for the power im gonna be making i think im gonna go with a set of drag wheels, so im putting my custom FM-10's up for grabs.

MANY people have inquired about buying the wheels if i ever sell them, however i dont have time to go back and sort through PM's and wait to hear back. First come, first serve.

They are one off Fikse FM-10's. fronts are 18x10 with BRAND NEW 285/35/18 Sumitomos. rears are 18x12 with 315/35/18 Pirelli Pzero Rossas (600 a peice new)

the fronts are Band new, rears will need replaced within a season.

Disclaimer: They were on a car with a 2" narrowed rearend and a mini-tub. These are the kind of wheels you build a whole car around. I dont know how they will fit a car without a minitubor any different rearend configuration.










from Fikse the hoops are bare polished and the centers are clear coated for easy maintenence
However, the previous owner must have washed the centers with something not clear coat friendly, or driven in road salt as on all 4 wheels the centers clear coat is ozidizing and have little white "snow flakes" all over them. The wheels centers will need to be unbolted and stripped and repolished/cleared. I had a local Wheel Doctor store quote me $50 a wheel to repolish and re clear the centers alone.

2,900 with tires or work out a trade for a high end drag wheel setup. 15x12's with 6.0 or 6.5 BS and 17x4's

located in cincinnati
Old 08-14-2009 | 09:11 PM
  #2  
Onetogofast's Avatar
TECH Resident
iTrader: (9)
 
Joined: Aug 2007
Posts: 850
Likes: 0
From: Amarillo, TX
Default

Good luck with the sale, good looking wheels and car!
Old 08-14-2009 | 09:13 PM
  #3  
SSIRBY's Avatar
TECH Apprentice
iTrader: (44)
 
Joined: Dec 2006
Posts: 396
Likes: 0
From: Carthage, MS
Default

damn thats a huge dish! nice wheels for sure!
Old 08-14-2009 | 09:18 PM
  #4  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

thanks guys. Only set i've EVER seen like it
Old 08-15-2009 | 10:57 AM
  #5  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

ttt for today
Old 08-15-2009 | 03:39 PM
  #6  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

btw i will listen to offers
Old 08-16-2009 | 07:55 AM
  #7  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

obo guys
Old 08-16-2009 | 12:10 PM
  #8  
chevroletfreak's Avatar
TECH Apprentice
iTrader: (6)
 
Joined: Nov 2002
Posts: 305
Likes: 0
From: Oklahoma City
Default

Is that a 2" narrow per side or total?
Old 08-16-2009 | 01:45 PM
  #9  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

per side
Old 08-17-2009 | 05:46 PM
  #10  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

$2500
Old 08-17-2009 | 07:00 PM
  #11  
lemons12's Avatar
TECH Senior Member

iTrader: (71)
 
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
Default

whats the lip on the rear?
Old 08-18-2009 | 12:46 PM
  #12  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

6'' lip on the rears
Old 08-18-2009 | 04:39 PM
  #13  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

bump for the evening crew
Old 08-18-2009 | 10:27 PM
  #14  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

I will also take a partial trade of some brand new or close 28x12.50 or 13.50x 15 DOT slicks
Old 08-19-2009 | 05:18 PM
  #15  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

bump for the evening
Old 08-19-2009 | 10:14 PM
  #16  
SmokedOutZ28's Avatar
11 Second Club

iTrader: (35)
 
Joined: Dec 2004
Posts: 2,163
Likes: 0
From: NW Chicago burbs
Default

Whats the backspacing? I'm assuming with a 12'' wide wheel and 6'' lip there 5'' backspacing?
Old 08-20-2009 | 08:55 AM
  #17  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

Originally Posted by SmokedOutZ28
Whats the backspacing? I'm assuming with a 12'' wide wheel and 6'' lip there 5'' backspacing?
ill have to check for sure here in alittle bit
Old 08-20-2009 | 11:58 AM
  #18  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

im not sure how the wheels are technically measured but from outside lip to outside lip they are 18x13. 6" lip and 6" backspace
Old 08-20-2009 | 12:42 PM
  #19  
midnightblue02's Avatar
TECH Enthusiast

iTrader: (21)
 
Joined: Jun 2006
Posts: 548
Likes: 0
From: danville, ky
Default

nice wheels
Old 08-20-2009 | 06:07 PM
  #20  
lt1badbird's Avatar
Thread Starter
TECH Enthusiast
iTrader: (-1)
 
Joined: Nov 2008
Posts: 510
Likes: 0
Default

thanks!


Quick Reply: FS: the infamous set of custom DEEP DISH Fikse FM-10's



All times are GMT -5. The time now is 09:52 AM.