LS2 6.0 truck intake/exhaust/accy/oil pan
11-05-2009 | 04:58 PM
#1
LS2 6.0 truck intake/exhaust/accy/oil pan All items are from a 2006 Trailblazer SS 6.0 LS2 motor with 27k miles. Updated this thread after heads sold. I'll accept offers on everything listed.
Updated with sold items - heads, intake and alt all sold!
Truck 6.0 exhaust manifolds with heat shields - excellent shape. I've since removed the torched off studs on one of the manifolds. $50
and
Stock LS2 truck intake complete, injectors, fuel rail and throttle body sold!
All accessories - A/C, PS, Crank Pulley, Water pump - all avail.
Truck Crank pulley $25
A/C compressor and bracket with tensioner/pulley: $75
Stock Alternator -sold!
Stock PS pump and big bracketNote, the reservoir drain nipple on the bottom is broken off - so you need to use your own reservoir. Price lowered as a result -$50
Stock Waterpump assy, in excellent shape. I can include the fan clutch assy if you want. $75
Close up and I should be able to get the clutch fan and elec connector off - just need to find a tool to hold the pulley:
ALL accessories and crank pulley, water pump and fan belts - $250
Stock automatic flexplate $25
Stock AWD oil pan w/o diff, incl oil pickup $60
Stock Engine mounts - the steel part that bolts to the motor. I don't have the rubber part. $25
I'm in Corpus Christi TX, can ship anything.
-Bob
Updated with sold items - heads, intake and alt all sold!
Truck 6.0 exhaust manifolds with heat shields - excellent shape. I've since removed the torched off studs on one of the manifolds. $50
and
Stock LS2 truck intake complete, injectors, fuel rail and throttle body sold!
All accessories - A/C, PS, Crank Pulley, Water pump - all avail.
Truck Crank pulley $25
A/C compressor and bracket with tensioner/pulley: $75
Stock Alternator -sold!
Stock PS pump and big bracketNote, the reservoir drain nipple on the bottom is broken off - so you need to use your own reservoir. Price lowered as a result -$50
Stock Waterpump assy, in excellent shape. I can include the fan clutch assy if you want. $75
Close up and I should be able to get the clutch fan and elec connector off - just need to find a tool to hold the pulley:
ALL accessories and crank pulley, water pump and fan belts - $250
Stock automatic flexplate $25
Stock AWD oil pan w/o diff, incl oil pickup $60
Stock Engine mounts - the steel part that bolts to the motor. I don't have the rubber part. $25
I'm in Corpus Christi TX, can ship anything.
-Bob
Last edited by Bob H; 11-09-2009 at 02:13 PM.
11-05-2009 | 11:38 PM
#5
PM responded. Yes, I have pictures - but on my other computer and I haven't uploaded them yet. I'll put them up tomorrow early afternoon. I have the intake pictures on my e-mail account that I sent to someone else that I can send to you if you send my your e-mail address.
-Bob
-Bob
11-06-2009 | 06:15 PM
#6
Ok, pictures are being linked in the first post now. All photos can be found here:
http://s464.photobucket.com/albums/r...nvey/?start=40
There are three photos on page 2,(that link is to page 3).
Of note, the exhaust manifolds - one side had the studs cut off with a torch - I've removed them so you either can replace them with studs, or use bolts.
-Bob
http://s464.photobucket.com/albums/r...nvey/?start=40
There are three photos on page 2,(that link is to page 3).
Of note, the exhaust manifolds - one side had the studs cut off with a torch - I've removed them so you either can replace them with studs, or use bolts.
-Bob
Trending Topics
11-09-2009 | 02:14 PM
#8
Updated - the following items are sold, paid for and shipped:
243 heads
Intake, DBW throttle body and injectors
Alternator
Everything else is available - I'll entertain all offers.
-Bob
243 heads
Intake, DBW throttle body and injectors
Alternator
Everything else is available - I'll entertain all offers.
-Bob
