Custom painted LS6 manifold, Jantzer Ported/Powdercoated Throttle Body, and HF Bellow
02-11-2005, 05:17 PM
#1
Custom painted LS6 manifold, Jantzer Ported/Powdercoated Throttle Body, and HF Bellow -Custom painted LS6 manifold
SOLD
https://ls1tech.com/forums/attachmen...chmentid=24308
-Jantzer Ported/Powdercoated Throttle Body Brand New
No core needed.
SOLD
Original price would be over $300 for this since I added the chrome shaft
spring for $35 extra and didn’t have a core
https://ls1tech.com/forums/attachmen...chmentid=24310 https://ls1tech.com/forums/attachmen...chmentid=24311
-Thunder Racing LS1 High-Flow Bellows, 1998-2002 LS1 F-body Brand New
SOLD
For faster response email me
at wicked2001ss@yahoo.com
I take paypal or money orders which ever is easier for you.
coming soon
-LS6 Manifold unpainted
-30 lb. injectors
-West Coast Stage 2 5.7 heads with titainum retainers, Rev dual springs, and Rev 2.02 1.57 valves
SOLD
https://ls1tech.com/forums/attachmen...chmentid=24308
-Jantzer Ported/Powdercoated Throttle Body Brand New
No core needed.
SOLD
Original price would be over $300 for this since I added the chrome shaft
spring for $35 extra and didn’t have a core
The following modifications are done to the TB:
*Ported to 75mm and Polished Inside
*Inlet is shaped to reduce turbulence
*TB base is Powdercoated Silver
*Front of Throttle Shaft is cut off for improved flow
*Throttle Shaft is Powdercoated Black
*Return Spring is polished
*Throttle blade screws are shortened
*Blade is polished
*Hole is Epoxied in and contoured for best flow
*Copper tubing is used for accuracy for the IAC & PCV Holes
*Throttle Stop is ground to fully open the blade (Bump Stop Mod)
*Rear of TB is surfaced for a clean fit/finish to the Manifold
***ADD CHROME SHAFT/SPRING FOR $35***
*Ported to 75mm and Polished Inside
*Inlet is shaped to reduce turbulence
*TB base is Powdercoated Silver
*Front of Throttle Shaft is cut off for improved flow
*Throttle Shaft is Powdercoated Black
*Return Spring is polished
*Throttle blade screws are shortened
*Blade is polished
*Hole is Epoxied in and contoured for best flow
*Copper tubing is used for accuracy for the IAC & PCV Holes
*Throttle Stop is ground to fully open the blade (Bump Stop Mod)
*Rear of TB is surfaced for a clean fit/finish to the Manifold
***ADD CHROME SHAFT/SPRING FOR $35***
-Thunder Racing LS1 High-Flow Bellows, 1998-2002 LS1 F-body Brand New
SOLD
For faster response email me
at wicked2001ss@yahoo.com
I take paypal or money orders which ever is easier for you.
coming soon
-LS6 Manifold unpainted
-30 lb. injectors
-West Coast Stage 2 5.7 heads with titainum retainers, Rev dual springs, and Rev 2.02 1.57 valves
Last edited by WICKED SS; 02-22-2005 at 05:54 PM.
02-12-2005, 12:55 AM
#6
skimms98
as of right now you have dibs! Got a few emails about it but your are the 1st one in line.
sent you back a email, been busy at work. If you want to buy it email me back and let me know so I can send you my address for the money order.
98Z28MASS
$600 for both, free shipping on the LS6. Thats if skimms doesnt want it.
nitenshinarmor
Email sent back
thanks guys
as of right now you have dibs! Got a few emails about it but your are the 1st one in line.
sent you back a email, been busy at work. If you want to buy it email me back and let me know so I can send you my address for the money order.
98Z28MASS
$600 for both, free shipping on the LS6. Thats if skimms doesnt want it.
nitenshinarmor
Email sent back
thanks guys
Trending Topics
02-23-2005, 04:49 PM
#15
Launching!
Join Date: Aug 2004
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
WICKED SS...Thank you!!! You sent the LS6 out and got to me faster than anyone I have delt with. The intake is beautiful! Nice paint job!! Wish I got back with you sooner, but been busy researching for more mods. Thank you!!!
