Full AFR H/C setup 95% of parts *NEW*!!!
06-22-2005 | 04:23 PM
#1
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: Windham, NH
Full AFR H/C setup 95% of parts *NEW*!!! Okay... this is a little painful. My Vette must go and I have a COMPLETE H/C package sitting in my garage. Almost every part is BRAND NEW (except the cam which I was told is slightly used). This is top quality stuff (AFR, Crane, ARP so on) that I just never got the chance to install and now the car is going away. So here goes:
AFR 205s fully assembled as they come from AFR (66 cc, non-milled, standard dual springs) *NEW* - SOLD
AFR 224/228 .581/.581 114+1 cam *Slightly Used* (according to person I bought it off of) -SOLD
Crane Accelerated Lift adjustable 1.72 Rockers *NEW* (plates, studs and pushrods included) - $600 shipped in US
Thunder Racing Ported LS6 Oil Pump *NEW* - SOLD
ARP LS1 Head Bolts *NEW* - SOLD
Cometic 3.910/.040 Gasket Set (2) *NEW* - SOLD
Rollermaster Adjustable Double Timing Chain *NEW* - SOLD
ASP Underdrive Pulley with Belt *NEW* (for '01 Vette. Not sure if they fit all LS1s) - $225 shipped in US
Thunder Racing Cam Swap Gasket Set *NEW* ('01-'04 includes: GM Water Pump Gaskets, GM Timing Cover Gasket, GM Timing Cover Seal, GM Valve Cover Gaskets, GM Harmonic Balancer Bolt ) - SOLD
DynoJet WideBand Commander *NEW* (white A/F gauge) - $425 shipped in US
I got a few other parts but I need to get the details on them so this is the pile for now.
If anyone needs more info let me know.
--Bill
AFR 205s fully assembled as they come from AFR (66 cc, non-milled, standard dual springs) *NEW* - SOLD
AFR 224/228 .581/.581 114+1 cam *Slightly Used* (according to person I bought it off of) -SOLD
Crane Accelerated Lift adjustable 1.72 Rockers *NEW* (plates, studs and pushrods included) - $600 shipped in US
Thunder Racing Ported LS6 Oil Pump *NEW* - SOLD
ARP LS1 Head Bolts *NEW* - SOLD
Cometic 3.910/.040 Gasket Set (2) *NEW* - SOLD
Rollermaster Adjustable Double Timing Chain *NEW* - SOLD
ASP Underdrive Pulley with Belt *NEW* (for '01 Vette. Not sure if they fit all LS1s) - $225 shipped in US
Thunder Racing Cam Swap Gasket Set *NEW* ('01-'04 includes: GM Water Pump Gaskets, GM Timing Cover Gasket, GM Timing Cover Seal, GM Valve Cover Gaskets, GM Harmonic Balancer Bolt ) - SOLD
DynoJet WideBand Commander *NEW* (white A/F gauge) - $425 shipped in US
I got a few other parts but I need to get the details on them so this is the pile for now.
If anyone needs more info let me know.
--Bill
Last edited by bletour2001; 07-06-2005 at 02:45 PM.
06-22-2005 | 06:05 PM
#3
06-22-2005 | 06:10 PM
#4
Teching In
Joined: Mar 2004
Posts: 2
Likes: 0
Originally Posted by bletour2001
Okay... this is a little painful. My Vette must go and I have a COMPLETE H/C package sitting in my garage. Almost every part is BRAND NEW (except the cam which I was told is slightly used). This is top quality stuff (AFR, Crane, ARP so on) that I just never got the chance to install and now the car is going away. So here goes:
AFR 205s fully assembled as they come from AFR (66 cc, non-milled, standard dual springs) *NEW* - $2000 shipped in US
AFR 224/228 .581/.581 114+1 cam *Slightly Used* (according to person I bought it off of) - $300 shipped in US
If someone wants to buy it as a package I'll knock $50 off and sell both the cam and heads for $2250 shipped in US
Crane Accelerated Lift adjustable 1.72 Rockers *NEW* (plates, studs and pushrods included) - $600 shipped in US
Thunder Racing Ported LS6 Oil Pump *NEW* - $125 shipped in US
ARP LS1 Head Bolts *NEW* - $125 shipped in US
Cometic 3.910/.040 Gasket Set (2) *NEW* - $125 shipped in US
Rollermaster Adjustable Double Timing Chain *NEW* - $80 shipped in US
ASP Underdrive Pulley with Belt *NEW* (for '01 Vette. Not sure if they fit all LS1s) - $225 shipped in US
Thunder Racing Cam Swap Gasket Set *NEW* ('01-'04 includes: GM Water Pump Gaskets, GM Timing Cover Gasket, GM Timing Cover Seal, GM Valve Cover Gaskets, GM Harmonic Balancer Bolt ) - $45 shipped in US
DynoJet WideBand Commander *NEW* (white A/F gauge) - $425 shipped in US
I got a few other parts but I need to get the details on them so this is the pile for now.
If anyone needs more info let me know.
--Bill
AFR 205s fully assembled as they come from AFR (66 cc, non-milled, standard dual springs) *NEW* - $2000 shipped in US
AFR 224/228 .581/.581 114+1 cam *Slightly Used* (according to person I bought it off of) - $300 shipped in US
If someone wants to buy it as a package I'll knock $50 off and sell both the cam and heads for $2250 shipped in US
Crane Accelerated Lift adjustable 1.72 Rockers *NEW* (plates, studs and pushrods included) - $600 shipped in US
Thunder Racing Ported LS6 Oil Pump *NEW* - $125 shipped in US
ARP LS1 Head Bolts *NEW* - $125 shipped in US
Cometic 3.910/.040 Gasket Set (2) *NEW* - $125 shipped in US
Rollermaster Adjustable Double Timing Chain *NEW* - $80 shipped in US
ASP Underdrive Pulley with Belt *NEW* (for '01 Vette. Not sure if they fit all LS1s) - $225 shipped in US
Thunder Racing Cam Swap Gasket Set *NEW* ('01-'04 includes: GM Water Pump Gaskets, GM Timing Cover Gasket, GM Timing Cover Seal, GM Valve Cover Gaskets, GM Harmonic Balancer Bolt ) - $45 shipped in US
DynoJet WideBand Commander *NEW* (white A/F gauge) - $425 shipped in US
I got a few other parts but I need to get the details on them so this is the pile for now.
If anyone needs more info let me know.
--Bill
06-22-2005 | 09:26 PM
#7
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: Windham, NH
Originally Posted by 99SSinOC
I'll take the chain... do you have a paypal account? shipping is 92691 for what it's worth...
--Bill
Trending Topics
06-22-2005 | 09:27 PM
#8
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: Windham, NH
Originally Posted by Frank J Wadley
Do you still have the head bolts?
--Bill
06-22-2005 | 09:35 PM
#9
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: Windham, NH
06-22-2005 | 09:36 PM
#10
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: Windham, NH
Originally Posted by LETZ RUN
how about 2250 for heads and wideband?
I'll let you know in a day or two if I'm willing to come down so more.
--Bill
