TEA Stage 1.5 ported 5.3 L heads finished by ForceFed High Performance
#1
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Feb 2003
Location: nottingham, MD
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I really hate to sell these, but it appears I'm going a different direction in life than I thought. I bought these from narcszm with only 1800 miles on them off this board a few months ago and they haven't been touched since. Still wrapped up in the boxes awaiting the install that now doesn't look feasible. Here's the original post I bought them from with pics of the heads.
https://ls1tech.com/forums/showthrea...+stage+1.5+5.3
This text is from that post:
The heads were CNC ported then hand-finished and decked 0.020"
I bought them without valve springs and installed Patriot Gold dual springs.
Here are the specifics:
GM 5.3L / 4.8L [casting 706] cylinder heads
Ferrea 2.02" stainless steel intake valves
Ferrea 1.55" stainless steel exhaust valves
GM / Viton rubber and steel valve seals
Patriot Performance "Gold" dual valve springs [good for 0.650" lift]
Patriot Performance Titainum spring retainers
Patriot Performance hardened steel spring seats
Patriot Performance hardened valve seats
Stage 1.5 porting by Total Engine Airflow
Hand finishing by ForceFed High Performance
These heads were installed with GM graphite gaskets and GM head bolts. They will be coming off the vette as soon as they are sold.
$975.00 is what I paid Narczsm for them and that's all I'm looking to get back.
My wife's father has Alzheimer's and we have to pay to move him closer to us here in VA so we can care for him. It sucks but sometimes things are more important than car stuff. I'll be listing more stuff soon as I go through the garage. I have over 1000 positives on ebay under the same name and have been a member here for quite a while. Thanks.
https://ls1tech.com/forums/showthrea...+stage+1.5+5.3
This text is from that post:
The heads were CNC ported then hand-finished and decked 0.020"
I bought them without valve springs and installed Patriot Gold dual springs.
Here are the specifics:
GM 5.3L / 4.8L [casting 706] cylinder heads
Ferrea 2.02" stainless steel intake valves
Ferrea 1.55" stainless steel exhaust valves
GM / Viton rubber and steel valve seals
Patriot Performance "Gold" dual valve springs [good for 0.650" lift]
Patriot Performance Titainum spring retainers
Patriot Performance hardened steel spring seats
Patriot Performance hardened valve seats
Stage 1.5 porting by Total Engine Airflow
Hand finishing by ForceFed High Performance
These heads were installed with GM graphite gaskets and GM head bolts. They will be coming off the vette as soon as they are sold.
$975.00 is what I paid Narczsm for them and that's all I'm looking to get back.
My wife's father has Alzheimer's and we have to pay to move him closer to us here in VA so we can care for him. It sucks but sometimes things are more important than car stuff. I'll be listing more stuff soon as I go through the garage. I have over 1000 positives on ebay under the same name and have been a member here for quite a while. Thanks.
Last edited by skimms98; 07-24-2005 at 04:53 PM.
#4
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Feb 2003
Location: nottingham, MD
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As narcszm said in his original post, there are none past what TEA does on the initial port, the hand finishing by FFHP I'm sure is worth some more. I did not get any further info when I bought the heads other than whats' in the original post and on TEA's website concerning the Stg 1.5 ported 5.3 heads. That is all I have regarding them.
Trending Topics
#8
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Feb 2003
Location: nottingham, MD
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Still have everything for sale.
Heads and F13 cam $1299
Money order only, I can't do paypal and again I have over 1000 positives on ebay under the same name, I ahve bought from WickedSS, RichieCarBone, Narczsm and other on this board, no problems.
Heads and F13 cam $1299
Money order only, I can't do paypal and again I have over 1000 positives on ebay under the same name, I ahve bought from WickedSS, RichieCarBone, Narczsm and other on this board, no problems.
#15
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Feb 2003
Location: nottingham, MD
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The F13 is brand new in the box, never been run. Specs are on Futrals website. It is on a 114. They're not running their sale on them anymore but I am. If my deal above falls through for any reason, it's back up for sale at $340.