ls1 engine for sale
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: MONTGOMERY, AL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
ls1 engine for sale
2000 z-28 engine with 70,000 miles. Had good oil pressure and no bottom end knock, it does need to have at least 1 piston replaced,but no sleve damage that i can see. I would recomend replacing them all with a set of forged pistons. Will sell as a short block or whole engine minus the intake. the heads are off the motor and fresh out of the machine shop with a valve job. It has the oil pan, front and rear covers,rockers, valve covers and valley cover. will take 1000.00 for complete motor or will work out prices if split up.
thanks chuck
thanks chuck
Last edited by BLK02SS; 07-27-2005 at 09:13 AM.
Trending Topics
#12
TECH Junkie
iTrader: (8)
Join Date: Dec 2003
Location: Marietta, Ga.
Posts: 3,899
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLK02SS
yes i still have it. will take 450.00 for the short block. includes block, crank, rods, and pistons.
let me know if interested
chuck
let me know if interested
chuck
#18
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLK02SS
2000 z-28 engine with 70,000 miles. Had good oil pressure and no bottom end knock, it does need to have at least 1 piston replaced,but no sleve damage that i can see. I would recomend replacing them all with a set of forged pistons. Will sell as a short block or whole engine minus the intake. the heads are off the motor and fresh out of the machine shop with a valve job. It has the oil pan, front and rear covers,rockers, valve covers and valley cover. will take 1000.00 for complete motor or will work out prices if split up.
thanks chuck
thanks chuck
#19
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: MONTGOMERY, AL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
it came out with a rattle, i pulled the heads to check lifters and pushrods, they are fine but 3rd cyl back on drivers side of engine you can move piston in cylinder. i rotated the engine and do not see any wear on cylinders. my guess is the ring land on the piston is gone.