Draglites,ls1 parts,3rd gen parts, SBC parts, etc..
#1
Draglites,ls1 parts,3rd gen parts, SBC parts, etc..
I might be parting out my 86 z28 if nobody bites on the ad in the next week. Also doing a little garage cleaning. All prices are NEGOTIABLE. I also can get very good deals on shipping through AAA cooper. I am decently known on the southern section and have plenty of members to back up my good reputation.
-4 draglite wheels/lugnuts - 650 + shipping
Fronts
15x4 5x4.75 lug pattern
165 rtires are 95% tread
Rears
15x8 5.5" 5x4.75
255/60/15 regular performance radial tires are about 50-60%
- 01' trans am 3.42 4 channel abs rear end - 250 + shipping no backing plates/brakes
-Stock 01-02 ls1 exhaust manifolds/ypipe - 40 + shipping, prefer local pickup
-Spohn panhard rod non adjustable - 50 +shipping
-Spohn non adjustable lca's - 75 + shipping
-Holley Red electric Fuel pump 7psi - 50 + shipping
-Edelbrock performer 600cfm carb - 150+ shipping
-Edelbrock performer rpm intake - 75 + shipping
-82 92 fbody Hooker coated shorty headers with an alright y pipe - 100 + shipping
-350 longblock out of a 89 1500 truck. runs okay. needs to be reringed i think due to smoke at higher rpms. i have a video of it running if you want. Great engine to build for project. asking 200obo + shipping
-700r4 transmission out of a 86' z28. unsure of mileage. Shifts well and goes through the gears just fine. can make a video of it going through the gears if desired. asking 200 obo + shipping
Thanks for looking,
Craig
-4 draglite wheels/lugnuts - 650 + shipping
Fronts
15x4 5x4.75 lug pattern
165 rtires are 95% tread
Rears
15x8 5.5" 5x4.75
255/60/15 regular performance radial tires are about 50-60%
- 01' trans am 3.42 4 channel abs rear end - 250 + shipping no backing plates/brakes
-Stock 01-02 ls1 exhaust manifolds/ypipe - 40 + shipping, prefer local pickup
-Spohn panhard rod non adjustable - 50 +shipping
-Spohn non adjustable lca's - 75 + shipping
-Holley Red electric Fuel pump 7psi - 50 + shipping
-Edelbrock performer 600cfm carb - 150+ shipping
-Edelbrock performer rpm intake - 75 + shipping
-82 92 fbody Hooker coated shorty headers with an alright y pipe - 100 + shipping
-350 longblock out of a 89 1500 truck. runs okay. needs to be reringed i think due to smoke at higher rpms. i have a video of it running if you want. Great engine to build for project. asking 200obo + shipping
-700r4 transmission out of a 86' z28. unsure of mileage. Shifts well and goes through the gears just fine. can make a video of it going through the gears if desired. asking 200 obo + shipping
Thanks for looking,
Craig
Last edited by Fade2blk500; 09-28-2005 at 11:48 PM.
#6
I know for a fact you'll need to grind the calipers with these wheels cuz this is my brother, and they came off my 99 ls1 before we put them on his However, you don't remove THAT much material. That was just for the rears, not sure about the fronts he got them from some guy who had them on an lt1.
Peace,
Josh
Peace,
Josh
Trending Topics
#11
So you want ceramic coated headers and y pipe (which is bulky) shipped to NJ? I'll go ahead and chime in and say no thanks, and I'm not even the seller. Reason being shipping on something like that is going to be very expensive..
Peace,
Josh
Peace,
Josh