Fs: Weld Alumnastar 2.0 Rears
11-24-2005 | 09:07 PM
#1
Thread Starter
FASTEST ALL MOTOR LS1 IN THE COUNTRY
iTrader: (4)
Joined: Dec 2001
Posts: 665
Likes: 0
From: Chicago, IL
Fs: Weld Alumnastar 2.0 Rears like the topic says i have a pair of alumnastar 2.0 rear rims that are 15*10 with a 6" backspace.....they are already drilled and and ready to be mounted with slicks to go racing.....my rearend was shortened 1" per side to help tuck the 28*10.5*15 et drag....this setup tucked the slick 1/2" per side...and worked great
new they are $344.95 each in summit.....
will let both of them as a pair go for......$535.00 SOLD
* i can also include a pair of 28*10.5*15 ET DRAGS....with 5 passes on them....for $175
new they are $344.95 each in summit.....
will let both of them as a pair go for......$535.00 SOLD
* i can also include a pair of 28*10.5*15 ET DRAGS....with 5 passes on them....for $175
Last edited by CAMN HAWK; 12-12-2005 at 12:09 AM.
11-25-2005 | 12:30 AM
#4
Thread Starter
FASTEST ALL MOTOR LS1 IN THE COUNTRY
iTrader: (4)
Joined: Dec 2001
Posts: 665
Likes: 0
From: Chicago, IL
im really not looking to sell the fronts only the rears, but i can sell the fronts as well if you wanted the whole set.....
the front go for..$360 each
id be willing to part with all 4 ( whole set)....$1200
the front go for..$360 each
id be willing to part with all 4 ( whole set)....$1200
Trending Topics
12-01-2005 | 11:07 PM
#8
Thread Starter
FASTEST ALL MOTOR LS1 IN THE COUNTRY
iTrader: (4)
Joined: Dec 2001
Posts: 665
Likes: 0
From: Chicago, IL
i didnt do anything to the fenders of the car...but i have the strange drag brake kit on the rearend....so dont know if they would or woulodnt fit the stock calipers...
12-02-2005 | 03:34 PM
#10
Thread Starter
FASTEST ALL MOTOR LS1 IN THE COUNTRY
iTrader: (4)
Joined: Dec 2001
Posts: 665
Likes: 0
From: Chicago, IL
not to fit these rims.....only narrowed the rear 1"......with my new setup i mini tubed in and will now run a 15*12 with a 3"bs......all with stock suspension