383 Solid Roller Motor, LS1 Intake for LT1, 42lbs Injectors, Monoblade
01-25-2006, 02:40 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: Peachtree City, GA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
383 Solid Roller Motor, LS1 Intake for LT1, 42lbs Injectors, Monoblade BOTTOM END:
12:1 Compression,
Custom Nitrous Cam by Lazer Cams: 254/261 duration, .678 lift with 1.6 rockers
Cola 383 Crank
Eagle H Beam Rods
JE SRP Pistons
JE rings
4 bolt Mildon splayed Maincaps
Clevitee TriMetal Bearings
Copper Head Gasket
ARP Head Studs
Blue printed Moroso Oil Pump
Modified Stock Oil Pan
Diamond Scraper Windage Tray
Comp Cams Endure X Solid Roller Lifters (less then 500 miles)
Block is also O-ringed
TOP END:
MTI LT1 Heads:
Flow Numbers:
.200---149.8--111.5
.300---207.4--143.0
.400---247.3--162.5
.500---278.5--179.8
.600---289.5--190.0
.650---288.5--193.9
.700---xxxxx--195.8
Triple Valve springs good up to 700 lift (less then 500 miles)
Pro Magnum 1.6 NS Rocker Arms,Guide Plates, Stud Gridle, ARP Studs, Custom Valve covers powdercoated black.
Ported LT1 Intake with a NX Direct Port Nozzles, painted Red, opened up for a Monoblade.
There are 3674 miles on the motor, i bought the motor brand new from Nitro Dave about half a year ago, the motor is build to handle a lot of nitrous. The motor made 622/735 thru an auto with a 9inch on a 200 shot.
Also have a n2o kit for sale:
NX Wet Kit with a 10 lb bottle. Remote Bottle Opener, Heater, Msd window switch, nx progressive n2o controller, fuel pressure safety switch, purge, nice switch panel, bottle pressure gauge, professional wiring harness, custom bottle bracket. The kit is wired so it can be made very hidden on a LT1.
I would love to sell the whole motor together as it runs great, but i will part it out if necessary. If you are welcome you can come by and go for a ride in the car and hear it run etc. I am going to Ask for $5500 for the complete motor. As far as the n2o kit id like to get $1000 for it. If you buy the N2O kit and the Complete Engine for [b]$6000]/b]
LS1 Intake, SLP LID, Fast Toys Ram Air, K&N Filter, Smooth Bellow.
$ 450
Ford Racing 42lbs Injector less then 3000 miles on them.
$275
ASM MonoBlade like new,
will trade for a 58mm TB plus cash
or $450
If you have any questions, please EMAIL ME.
Thanks
Marcin
12:1 Compression,
Custom Nitrous Cam by Lazer Cams: 254/261 duration, .678 lift with 1.6 rockers
Cola 383 Crank
Eagle H Beam Rods
JE SRP Pistons
JE rings
4 bolt Mildon splayed Maincaps
Clevitee TriMetal Bearings
Copper Head Gasket
ARP Head Studs
Blue printed Moroso Oil Pump
Modified Stock Oil Pan
Diamond Scraper Windage Tray
Comp Cams Endure X Solid Roller Lifters (less then 500 miles)
Block is also O-ringed
TOP END:
MTI LT1 Heads:
Flow Numbers:
.200---149.8--111.5
.300---207.4--143.0
.400---247.3--162.5
.500---278.5--179.8
.600---289.5--190.0
.650---288.5--193.9
.700---xxxxx--195.8
Triple Valve springs good up to 700 lift (less then 500 miles)
Pro Magnum 1.6 NS Rocker Arms,Guide Plates, Stud Gridle, ARP Studs, Custom Valve covers powdercoated black.
Ported LT1 Intake with a NX Direct Port Nozzles, painted Red, opened up for a Monoblade.
There are 3674 miles on the motor, i bought the motor brand new from Nitro Dave about half a year ago, the motor is build to handle a lot of nitrous. The motor made 622/735 thru an auto with a 9inch on a 200 shot.
Also have a n2o kit for sale:
NX Wet Kit with a 10 lb bottle. Remote Bottle Opener, Heater, Msd window switch, nx progressive n2o controller, fuel pressure safety switch, purge, nice switch panel, bottle pressure gauge, professional wiring harness, custom bottle bracket. The kit is wired so it can be made very hidden on a LT1.
I would love to sell the whole motor together as it runs great, but i will part it out if necessary. If you are welcome you can come by and go for a ride in the car and hear it run etc. I am going to Ask for $5500 for the complete motor. As far as the n2o kit id like to get $1000 for it. If you buy the N2O kit and the Complete Engine for [b]$6000]/b]
LS1 Intake, SLP LID, Fast Toys Ram Air, K&N Filter, Smooth Bellow.
$ 450
Ford Racing 42lbs Injector less then 3000 miles on them.
$275
ASM MonoBlade like new,
will trade for a 58mm TB plus cash
or $450
If you have any questions, please EMAIL ME.
Thanks
Marcin
Why are all the good buys when Im broke? lol 
Good luck on sellin it man. Looking forward to seeing what u got planned. 
Trending Topics
01-26-2006, 10:35 PM
#10
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: Peachtree City, GA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLKWS6
why dont you sell this one and buy my 408 and put a REAL motor in there.....
