Parting out alot of the stock components on a 2000 Camaro that we are turning into a trailor queen


2000 Camaro Gauge Cluster $65





2000 Camaro driver side airbag $100



2000 Camaro Passenger Side Airbag $100




AC Delco AMP $40





Granatelli Air Lid $70



MAF $50



Coils & Brackets $100



M6 Center Console $100

Valve Covers $60




ASR Unit $70




Stock Fuel Rail & Injectors $55



Fog lights $60




AC Compressor $100

CLutch Master Cylinder $60


Spec 4 Clutch w/ Billet Flywheel $400



more coming soon

 

PM sent on the pump

 

nhow many miles on cluster

 

Will you sell just the peice that goes around the shifter? Not the boot but the plastic peice that bolts onto the consol itself.

 

I will take just the front Draglites if you are willing to part them out.

 

I'm interested in the 15x10 rear Draglites w/o tires as long as they're 7.5 backspace and in near perfect cond. Let me know the price and if your willing to separate the wheels and tires.

 

they are in pretty good condition...... i can take pictures of the fronts, but the other two our chassis guy has them since our car came back with the Weld Magnums on it .... lemme snap a pic of the front runners , but for now i am trying to sell them as a set

 

pm sent on A pillar gague pod.

 

heres the pics of the front runners, i belive the back spacing is 6.5" on the rear welds

 

OK. If you decide to break them up and they're 7.5 not 6.5 backspace let me know.

 

Are you willing to seperate the gauges in the pillar? I am interested in the AF.

EDIT: Actually I would be interested in both gauges but dont need the pillar.

 

I will take the fronts and Aftica will take the rears. Let me know if you want to sell them, I have cash in hand. Thanks.

 

sent you a PM on LS2

 

my best guess would have to be around the 55-58k range

 

How many miles on the pulley and does it come with the bolt?

 

how many miles on the pulley does it have the bolt as well and how many miles i have money in paypal ready to go

 

I would be interested in just the gauge POD if the other guy wants the gauges, just shoot a PM if you want to do this and the pump when you get the paypal set up.

 

May be interested in the fuel pump. Can that pump be used as an in-line booster pump to suck through the stock pump? And would you sell the coil brackets without the coils?

 

the pulley and the belt have around 5k miles on it, and you use your existing crank bolt


the fuel pump is pending , but to answer your question, yes it can be used as a inline booster pump, & that was its intended use on the Camaro it came off of

95ttoplt1 - you have a PM


thanks,

matt

 

Any updates on the pending sale for the gauges and pod?