Snap-On 1/2 inch torque wrench QD3R250 , Adj. Click-type, U.S., Fixed-Ratchet, 50-250 ft. lb., 1/2" drive $140.00



Snap-On Pliers Set, Snap Ring, 4 pcs. SRP400 $75.00



crane cams valve spring tool 99472-1 $80.00



moroso pro degree wheel 18" 62191 $30.00



electric ring filer proform 66765 $125.00



arp rod bolt stretch guage 100-9941 $70.00

kd ring compression pliers for 3 7/8-4 1/8 boreKD 1123 KD 1114 $20.00

KD pulley remover installer
Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The threaded end installs late-model GM alternator and power steering pulleys, including Quad 4. Reverse the jaws to pull the alternator internal bearing. The puller fits some AMCs KD 2897 $40.00



snap on Gauge, Cylinder Bore (2.125" to 7" Range) dial indicator 130.00
older model does not have plastic case comes in a box from snap-on



4 PC STUD REMOVER METRIC SET

• Three internal rollers grip the stud securely in either direction for quick and easy removal and installation.
• Designed for hard to reach studs.
• Includes 3/8" drive 6mm and 8mm stud removers with 3/4" external hex for use with 3/8" drive tools or 3/4" wrench.
• Also includes 1/2" drive 10mm and 12mm stud removers with 7/8" external hex for use with 1/2" drive tools or 7/8" wrench.
• All four sockets packaged in a convenient blow molded case.

sr102 $30.00



OEM 11 - Piece Disc Brake Tool Set

Assists in the replacement of brake pads on most 4 wheel disc brake cars.
Forces the pin straight back into the caliper as well as rotating the pistons back in on the vehilcles with self-adjusting parking brakes.Comes in blow molded plastic carry case.

$25.00


oil pressure sender socket for ls1 $10.00

ti2135 IR 1/2 impact gun $130.00

Craftsman 3/8 in. Impact gun
Sears item #00919916000 Mfr. model #19916
One hand operation with forward and reverse push buttons. 260 ft. lb. reverse torque. 230 ft. lb. forward torque. 1,500 blows per minute. 14,500 rpm free speed $70.00



all prices do not include shipping

 

prices reduced

 

you still want 80 for the spring tool??is it new?

 

Replied to your thread on the CF.

 

no its used and yes i still want 80 for it dont think its a item that loses value
go buy one from thunder for 114.99 then have it shipped for $10 mine ill do for 80 shipped and after one set of springs with the new one it will look exactly like mine

george

 

oil pressure sender socket for ls1 $10.00

u take pay pal

 

yep but 10 wont cover shipping to florida

 

let me see when bob will be down by u and see if he can swing buy and pick it up

 

Do U still have the crane spring tool?