2005 LQ9 for Sale w/ LS2 GTO Acc.& Fbody oil pan, Vigilante, 4L60E
09-05-2006, 03:10 PM
#1
On The Tree
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Location: Miami, Floor-it-a
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
2005 LQ9 for Sale w/ LS2 GTO Acc.& Fbody oil pan, Vigilante, 4L60E Up for grabs is my 2005 LQ9 with 4,902 mile on it. The Denali was t'boned on both sides. Truck still drove. But the engine was removed as the truck was junked.
It still has the truck intake. Also comes with most of LS2 gto accessories bolted on. Balancer, Alternator, P/S Pump, and AC compressor.
Unmolested wiring harness+ fuse box, and Programmed PCM from PCM forless.
Aeromotive Fuel Pressure Regulator with lines and fittings, and Fuel GAGE.
$1800.
**********************************************
I also have a used F body oil pan. And I will include NEW in box, the F body pick up, windage tray, dip stick, and dip stick tube.
$175shipped *****SOLD******
************************************************** ***
I also have a 1998 4L60E out of a T/A. T/A had 33K miles on it. Just recently had a shift kit. Tranny was removed for a T56. I dropped the pan to change the oil in it, and the fluid was very clean. Little to no dust in it. No metal that I could feel.
Forgot to mention, the tranny has been upgraded with a shift kit AND most importantly the DEEPER Truck tranny pan + filter.
$450
************************************************** ****
Vigilante 3500 9.5" Stall
I got this from someone on the board. I bougth it for my project. I sent it out to get checked because I am picky about stuff. There was nothing wrong with it, so bit I still had Precision rebuilt it as a just in case. Installed it on the tranny. But never turned on or started.
I got the fax in from Precision Industries from when I rebuilt it.
$450
************************************************** ****
It still has the truck intake. Also comes with most of LS2 gto accessories bolted on. Balancer, Alternator, P/S Pump, and AC compressor.
Unmolested wiring harness+ fuse box, and Programmed PCM from PCM forless.
Aeromotive Fuel Pressure Regulator with lines and fittings, and Fuel GAGE.
$1800.
**********************************************
I also have a used F body oil pan. And I will include NEW in box, the F body pick up, windage tray, dip stick, and dip stick tube.
$175shipped *****SOLD******
************************************************** ***
I also have a 1998 4L60E out of a T/A. T/A had 33K miles on it. Just recently had a shift kit. Tranny was removed for a T56. I dropped the pan to change the oil in it, and the fluid was very clean. Little to no dust in it. No metal that I could feel.
Forgot to mention, the tranny has been upgraded with a shift kit AND most importantly the DEEPER Truck tranny pan + filter.
$450
************************************************** ****
Vigilante 3500 9.5" Stall
I got this from someone on the board. I bougth it for my project. I sent it out to get checked because I am picky about stuff. There was nothing wrong with it, so bit I still had Precision rebuilt it as a just in case. Installed it on the tranny. But never turned on or started.
I got the fax in from Precision Industries from when I rebuilt it.
$450
************************************************** ****
Last edited by toretto; 09-12-2006 at 12:31 PM.
Trending Topics
11-03-2006, 05:58 AM
#12
Interested in the Vig... any idea about how much RWHP this verter can hold?
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
