LS1 parts..block/internals/heads etc
#1
LS1 parts..block/internals/heads etc
I need to sell this stuff as soon as possible, i need the cash and the space...I WAS trying to sell everythign as a package deal but now it has been updated with individual prices...
Ok I was planning on using these parts to assemble a spare ls1 to possibly drop in my 85 iroc, but i lost intrest in doing that and now the parts are up for sale. I have a '01 camaro ss that i did a motor swap, and thats where most parts came from. I have someone interested but its not 100% and i need this stuff sold so basically first come first serve....Parts are all used unless otherwise noted, and parts included are....
Reasonable offers accepted. PRICES DO NOT INCLUDE SHIPPING!
$700 2004 LS1/LS6 NEW engine block SOLD
$150 2001 Crankshaft
$35 2001 connecting rods w/pistons(7 only)
$40 2000 connecting rods w/pistons(1 needs a rod bolt)
$25 LS6 rod bolts, NEW takeoffs, engine was never ran
$250 2001 complete heads (241 casting)
$200 2000 complete heads (853 casting)
$50 2001 camshaft
$40 2000 camshaft
$75 2000 lifters/pushrods/rocker arms
$75 2001 lifters/pushrods/rocker arms
$50 ignition coils (8)SOLD
$50 ignition coils (8)SOLD
$30 ignition coil mount brackets w/small harnesses SOLD
$20 ignition wires (14 or so)
$110 2000 LS1 intake manifold(not ls6)
$50 2000 valve covers SOLD
$50 2001 valve covers SOLD
$20 ls1 rear engine coverSOLD
$15 2000 ls1 valley cover
$15 2001 ls1 valley cover
$5 2000 cam timing gear
$5 2000 cam timing gear
$5 2000 cam timing chain
$5 2000 cam timing chain
$30 2000 fuel rail w/o snap ring for regulator(reg included)
$20 2000 main caps
$20 2001 main caps
$40 2000 water pump PENDING
$50 2001 water pump SOLD
$75 LS6 oil pump, NEW take-off SOLD
$25 2001 oil pump
$50 Edelbrock Shorty headersSOLD
$40 stock 2001 exhaust manifolds
$75 stock 2001 cats
$75 stock 2002 cats
$40 stock 2001 y-pipe
$75 hi-flow(not "squashed") y pipe 2001-2002
$5 stock 2000 air bellow
...plus i have assorted sensors and bolts from 2000/2001 engines
2000 LS1 engine wiring harness, may have some wires cut, nothing major though(i have to check actual condition and if application before i quote a price, i BELIEVE it is for an automatic)
__________________________________________
MORE PARTS ADDED:
LS1 stock flywheel w/stock bolts, had 10kmiles, was just resurfaced and not used since. $75
RAM HD clutch setup, disc/PP/alignment tool NEW, never even bolted up $350
LS1 PVC hose setup(NOT LS6) $15
2001 LS1 throttle body housing BARE, great to port. $20
-------------------------------------------------------------
ALSO FOR SALE>>>
NEW LS6 camshaft('03)
NEW LS6 pushrods(longer for ls6 cam w/smaller base circle)
NEW LS6 valvesprings w/seals, seats, and retainers.
(These parts were installed in a new GM crate engine but removed before engine was ever ran.)
$200
BTW, I sell on ebay under this same name, SmokingSS, and i'm also a very active member over at www.njfboa.org (New jersey f body owners association) so dont let my low post count here bother you, I stand behind everything I sell. Several members here know me personally and would vouch for me. Email me at SmokingSS@optonline.net with any questions.
I do not log on everyday so please be patient and allow me time to respond. Thank you. -paul
Ok I was planning on using these parts to assemble a spare ls1 to possibly drop in my 85 iroc, but i lost intrest in doing that and now the parts are up for sale. I have a '01 camaro ss that i did a motor swap, and thats where most parts came from. I have someone interested but its not 100% and i need this stuff sold so basically first come first serve....Parts are all used unless otherwise noted, and parts included are....
Reasonable offers accepted. PRICES DO NOT INCLUDE SHIPPING!
$700 2004 LS1/LS6 NEW engine block SOLD
$150 2001 Crankshaft
$35 2001 connecting rods w/pistons(7 only)
$40 2000 connecting rods w/pistons(1 needs a rod bolt)
$25 LS6 rod bolts, NEW takeoffs, engine was never ran
$250 2001 complete heads (241 casting)
$200 2000 complete heads (853 casting)
$50 2001 camshaft
$40 2000 camshaft
$75 2000 lifters/pushrods/rocker arms
$75 2001 lifters/pushrods/rocker arms
$50 ignition coils (8)SOLD
$50 ignition coils (8)SOLD
$30 ignition coil mount brackets w/small harnesses SOLD
$20 ignition wires (14 or so)
$110 2000 LS1 intake manifold(not ls6)
$50 2000 valve covers SOLD
$50 2001 valve covers SOLD
$20 ls1 rear engine coverSOLD
$15 2000 ls1 valley cover
$15 2001 ls1 valley cover
$5 2000 cam timing gear
$5 2000 cam timing gear
$5 2000 cam timing chain
$5 2000 cam timing chain
$30 2000 fuel rail w/o snap ring for regulator(reg included)
$20 2000 main caps
$20 2001 main caps
$40 2000 water pump PENDING
$50 2001 water pump SOLD
$75 LS6 oil pump, NEW take-off SOLD
$25 2001 oil pump
$50 Edelbrock Shorty headersSOLD
$40 stock 2001 exhaust manifolds
$75 stock 2001 cats
$75 stock 2002 cats
$40 stock 2001 y-pipe
$75 hi-flow(not "squashed") y pipe 2001-2002
$5 stock 2000 air bellow
...plus i have assorted sensors and bolts from 2000/2001 engines
2000 LS1 engine wiring harness, may have some wires cut, nothing major though(i have to check actual condition and if application before i quote a price, i BELIEVE it is for an automatic)
__________________________________________
MORE PARTS ADDED:
LS1 stock flywheel w/stock bolts, had 10kmiles, was just resurfaced and not used since. $75
RAM HD clutch setup, disc/PP/alignment tool NEW, never even bolted up $350
LS1 PVC hose setup(NOT LS6) $15
2001 LS1 throttle body housing BARE, great to port. $20
-------------------------------------------------------------
ALSO FOR SALE>>>
NEW LS6 camshaft('03)
NEW LS6 pushrods(longer for ls6 cam w/smaller base circle)
NEW LS6 valvesprings w/seals, seats, and retainers.
(These parts were installed in a new GM crate engine but removed before engine was ever ran.)
$200
BTW, I sell on ebay under this same name, SmokingSS, and i'm also a very active member over at www.njfboa.org (New jersey f body owners association) so dont let my low post count here bother you, I stand behind everything I sell. Several members here know me personally and would vouch for me. Email me at SmokingSS@optonline.net with any questions.
I do not log on everyday so please be patient and allow me time to respond. Thank you. -paul
Last edited by Smokingss; 11-03-2006 at 11:54 AM. Reason: added individual prices
#3
how much for the 01 pistons? they have the block coating on the skirts right?? i have one bad one, also the crank too or if you wanna sell just one of the 01 pistons and rods thats all i really need since you dont have 8 let me know
oh and is the harness for a 6 spd car and if so a price please, send a pm if you want thanx
oh and is the harness for a 6 spd car and if so a price please, send a pm if you want thanx
#5
as of right now, i am not selling the stuff seperately. I want it all gone at once, therefore EVERYTHING for 2000.
IF i decide to part it, i will then post prices, but until then its one package deal.
IF i decide to part it, i will then post prices, but until then its one package deal.
Trending Topics
#8
2001 Center Bolts Valve Covers
Price For Ls1 Center Bolts Valve Covers And The Coils Brackets For Those Covers (center Bolted). Then The S&h For Puerto Rico With Usps (regular Service); Slow But Cheaper. Will Pay With Pay Pal.
#16
TTT
individual prices have now been added. All parts are price + shipping.
Also feel free to make offers on parts, but i think the prices are pretty reasonable.
I am located near NYC, zip 07624. pickup is welcomed and i usually ship by UPS. the block will have to be shipped freight though(or ill deliver is local or i can meet if that helps)
individual prices have now been added. All parts are price + shipping.
Also feel free to make offers on parts, but i think the prices are pretty reasonable.
I am located near NYC, zip 07624. pickup is welcomed and i usually ship by UPS. the block will have to be shipped freight though(or ill deliver is local or i can meet if that helps)
#17
Originally Posted by Smokingss
TTT
individual prices have now been added. All parts are price + shipping.
Also feel free to make offers on parts, but i think the prices are pretty reasonable.
I am located near NYC, zip 07624. pickup is welcomed and i usually ship by UPS. the block will have to be shipped freight though(or ill deliver is local or i can meet if that helps)
individual prices have now been added. All parts are price + shipping.
Also feel free to make offers on parts, but i think the prices are pretty reasonable.
I am located near NYC, zip 07624. pickup is welcomed and i usually ship by UPS. the block will have to be shipped freight though(or ill deliver is local or i can meet if that helps)
#20
valve covers
How much for a set of center bolted valve covers and the coils brackets for them? How much shipped to Puerto Rico (usps zip 00680)? Are the 2000 ones center bolted? Do you have a set of coil brackets (alone, no harness) for those valve covers?
Last edited by Mike Cordero; 10-23-2006 at 01:24 PM. Reason: Add info.