Itimized part out list..
#1
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Itimized part out list..
Itimized list of stuff for sale. All parts have less than 300 miles unless noted and prices are shipped and insured:
FMIC/ kit. OBX from Ebay. 32x12x4 Perfect with 3” in/out. I have the pipes to sell as a whole kit WITH Tial 50mm BOV. Pipes are 3” polished stainless. $150 for just the FMIC or $475 for allpending
Turbonetics Racegate with new flanges $175
ASP pulley with both belts. I will need your stocker and belts. 10k miles $150
ASR/ TCS reversal module $50
T56 rebuilds stage 4 6 speed. Parts are: New 1-2 Slider, New 3-4 Slider, New 5/6 Slider, New Reverse Slider, New Mainshaft, New 1-6 Gears (Depending on Core Condition), Carbon Fiber Synchros, 3-4 Billet Keys, New Mikronite Finishing on 1-4 Gear (Mikronite extends the life of the transmission by more than double), Mikronite Finishing on 1-2 Slider and 3-4 Slider, Steel 3-4 Fork, Bronze Fork Pads 1-4 forks, New Bearing and Labor.....$2250.00 (21 day lead time for Mikronite finishing) $1500 but I need your working 6 speed
Textrilia clutch setup. Pressure plate, disk, flywheel, ARP bolts. Not slipped or raced. [/b]$650[/b]
MAF transilator. Has about 5k on it. $75
Camaro SS sub box. Comes with the Kicker Grills. $150
Amp rack. Black carpet and fits perfect. $100
BMR chomoly STB. Silver $100
Check back often. Im sure theres more Ill find when I go to the garage. This was all from memory.
FMIC/ kit. OBX from Ebay. 32x12x4 Perfect with 3” in/out. I have the pipes to sell as a whole kit WITH Tial 50mm BOV. Pipes are 3” polished stainless. $150 for just the FMIC or $475 for allpending
Turbonetics Racegate with new flanges $175
ASP pulley with both belts. I will need your stocker and belts. 10k miles $150
ASR/ TCS reversal module $50
T56 rebuilds stage 4 6 speed. Parts are: New 1-2 Slider, New 3-4 Slider, New 5/6 Slider, New Reverse Slider, New Mainshaft, New 1-6 Gears (Depending on Core Condition), Carbon Fiber Synchros, 3-4 Billet Keys, New Mikronite Finishing on 1-4 Gear (Mikronite extends the life of the transmission by more than double), Mikronite Finishing on 1-2 Slider and 3-4 Slider, Steel 3-4 Fork, Bronze Fork Pads 1-4 forks, New Bearing and Labor.....$2250.00 (21 day lead time for Mikronite finishing) $1500 but I need your working 6 speed
Textrilia clutch setup. Pressure plate, disk, flywheel, ARP bolts. Not slipped or raced. [/b]$650[/b]
MAF transilator. Has about 5k on it. $75
Camaro SS sub box. Comes with the Kicker Grills. $150
Amp rack. Black carpet and fits perfect. $100
BMR chomoly STB. Silver $100
Check back often. Im sure theres more Ill find when I go to the garage. This was all from memory.
Last edited by Country Boy; 03-06-2007 at 06:49 AM.
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the kit comes with everything pictured. Clamps, couplers, FMIC, BOV, pipes...
I have it on hold for someone right now, but I will know something Friday.
greatwhite. The light is sold, but Ill get you a price on the other stuff.
I have it on hold for someone right now, but I will know something Friday.
greatwhite. The light is sold, but Ill get you a price on the other stuff.
#9
I want:
All 25 3" T-bolt clamps. 25x$3= $75
All 24 Silicone couplers 24x$5= $120
The 5 Polished 3" SS bends $75
$270 total Shipped. PM me a paypal addy and I will get the $$$ sent out.
All 25 3" T-bolt clamps. 25x$3= $75
All 24 Silicone couplers 24x$5= $120
The 5 Polished 3" SS bends $75
$270 total Shipped. PM me a paypal addy and I will get the $$$ sent out.
#18
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
no. Since the housing bubble busted, I am practically jobless since I do new construction. I already have my truck (04 GMC) I have to keep for work and the SS was never a DD. I cant afford both anymore and now Im demodding the SS and selling it. I worked 3 days last month.
#20
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
bump..
Id like to sell everything..
Ill sell ALL this for $4300 SHIPPED!!!! The *** is the stuff thats sold as of right now! Pretty mucha complete minus the cold side.
PTS tubular headers
all piping is above K member
2 1/2” crossover
3” downpipe (goes above K member)
All hot pipes coated in 2000* black coating
hot pipes also wrapped in heat wrap
Wideband O2 bung in DP
***3” polished stainless coldside/ intercooler piping
***4” thick x32x12 polished front mount intercooler
***4 ply silicone couplings (black High Temp Silicone ***and Hose Techniques brand)
***All T-bolt clamps
All V band clamps
***Purple Tial 50mm BOV
Polished Tial 38mm wastegate w/ 6lb spring
Turbonetics manual boost controller
Aluminum restrictor (.060) for turbo oil inlet
-4 oil supply (with fitting for pan)
-10 oil drain (with fitting for pan)
All vacuum lines
Turbonetics T76MPS (the MPT was renamed) (supports the same power at T76GTS, but spools faster than the GTQ) with polished compressor cover and coated turbine cover
***Turbo blanket
Autometer 2 1/16” Cobalt vac/ boost guage
External Power steering cooler with hoses and adaptors
New PCV system with hoses
Dry element air filter
Polished BMR radiator plate
***Dual Flex a Lite pusher fans (fits in front of a/c condenser/ radiator with NO cutting)
1 12” puller fan with relay and switch
Alternator relocation bracket with bolts
2 Gatorback belts (fits with ASP crank pulley)
8 sparkplug wire guards with 4 additional heat sleeves for drivers side
GM 2 bar MAP sensor
My HPT 2 bar SD tune file. Tuned for 12 PSI
Both drill bits and taps to drill and tap for oil lines
upper radiator hose
Id like to sell everything..
Ill sell ALL this for $4300 SHIPPED!!!! The *** is the stuff thats sold as of right now! Pretty mucha complete minus the cold side.
PTS tubular headers
all piping is above K member
2 1/2” crossover
3” downpipe (goes above K member)
All hot pipes coated in 2000* black coating
hot pipes also wrapped in heat wrap
Wideband O2 bung in DP
***3” polished stainless coldside/ intercooler piping
***4” thick x32x12 polished front mount intercooler
***4 ply silicone couplings (black High Temp Silicone ***and Hose Techniques brand)
***All T-bolt clamps
All V band clamps
***Purple Tial 50mm BOV
Polished Tial 38mm wastegate w/ 6lb spring
Turbonetics manual boost controller
Aluminum restrictor (.060) for turbo oil inlet
-4 oil supply (with fitting for pan)
-10 oil drain (with fitting for pan)
All vacuum lines
Turbonetics T76MPS (the MPT was renamed) (supports the same power at T76GTS, but spools faster than the GTQ) with polished compressor cover and coated turbine cover
***Turbo blanket
Autometer 2 1/16” Cobalt vac/ boost guage
External Power steering cooler with hoses and adaptors
New PCV system with hoses
Dry element air filter
Polished BMR radiator plate
***Dual Flex a Lite pusher fans (fits in front of a/c condenser/ radiator with NO cutting)
1 12” puller fan with relay and switch
Alternator relocation bracket with bolts
2 Gatorback belts (fits with ASP crank pulley)
8 sparkplug wire guards with 4 additional heat sleeves for drivers side
GM 2 bar MAP sensor
My HPT 2 bar SD tune file. Tuned for 12 PSI
Both drill bits and taps to drill and tap for oil lines
upper radiator hose