FS: Professional Products Typhoon Manifold 86mm and C5 Replicas
05-19-2007 | 11:48 PM
#1
Thread Starter
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
FS: Professional Products Typhoon Manifold 86mm and C5 Replicas I have a set of C5 replica wheels that have the chrome 5 spoke with everything else blacked out. They have less than 500 miles on the rims and less than 2500 miles on the tires. The tires are 255/50/17 and 255/40/17. I'm thinking 550 obo. I am getting weld's and no longer need these.
I also have a Professional Products 86mm Manifold that is painted black that cannot have anymore than 500 miles on it. I have all the fittings that are required to run nitrous with the intake. It comes with the fuel rails also. I have a set of intake gaskets but you will need a throttle body gasket. I just got a great deal on another intake and no longer need this one. sold
I also have a Professional Products 86mm Manifold that is painted black that cannot have anymore than 500 miles on it. I have all the fittings that are required to run nitrous with the intake. It comes with the fuel rails also. I have a set of intake gaskets but you will need a throttle body gasket. I just got a great deal on another intake and no longer need this one. sold
Last edited by 98Camarod; 06-10-2007 at 12:53 AM.
05-23-2007 | 05:42 PM
#7
Will this intake work with the factory throttle body? How much for the manifold without the nitrous accessories? Is this a satin model that was painted black? Is there anything extra that I will need for install? Thank you very much. Very interested in purchasing!
Trending Topics
05-23-2007 | 09:02 PM
#8
Thread Starter
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
It will work with the factory tb. It is a satin model painted black. The only thing you will need is a tb gasket. I have a set of intake gaskets for it. 400 shipped sound ok?
05-24-2007 | 06:59 PM
#9
Are the intake gaskets for it the updated o-ring style kind? Are there any paint flaws on it (pics if any)? Also I'm assuming no holes were drilled for nitrous in the manifold itself. Comes with directions, correct? Did you ever get it to work on your car? I looked back at some of your older posts and read that you had many problems with it (mainly leaks). Only reason I ask is that I don't want to spend $400 and then be screwing around with it all summer long. Anyways I get paid tomorrow so answer these quick questions please and I look forward to the purchase. Thanks. Sorry about all the questions.
P.S. You said you bought it from another forum member. Who if I may ask? Did they experience the same problems with leakage?
P.S.S. Also just curious as to who painted it if you knew. It looks awesome!
P.S. You said you bought it from another forum member. Who if I may ask? Did they experience the same problems with leakage?
P.S.S. Also just curious as to who painted it if you knew. It looks awesome!
05-25-2007 | 02:25 PM
#10
Thread Starter
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
It was leaking from the fuel rails and I used thread tape to fix that. It has the updated o-ring style intake gasket. I have the directions. It is the engine enamel black paint with no scratches, you can clear it if you would like it better that way. He is in my trader feedback, I do not remember his name. He did not install it when he had it. I had an intake leak and it was because I used the green gaskets and did not cut the holes out where the head bolts stick up the tiny bit. But with the new gaskets there will not be a problem. Hope that clears everything up.
06-01-2007 | 06:28 PM
#18
Sorry about not getting back to you about the intake. I badly need a new set of tires, my rears are almost bald. I bought a set off eBay (4x P245/50ZR16 BFG G-force T/A KDW) for $335 with the $400 I had set aside for a manifold. If the intake manifold is still available next Friday (June 8th) I will likely jump on it. Thanks.
