FS:408 ls1 longblock with all forged internals, complete tan interior & gofast parts
#1
On The Tree
Thread Starter
iTrader: (-1)
Join Date: Jul 2006
Location: DETROIT MI
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
FS:408 ls1 longblock with all forged internals, complete tan interior & gofast parts
I'm going a simpler route with my 98 trans am so the big motor is up for sale. Breathless Performance built the motor about a year ago. It was originally $9890 from Breathless when new. Everything was new when the engine was built, block and all. It was used on a Vette for 750 miles total. After the breakin 500 miles the max boost that was run to it was 8lbs. It's made to handle a lot more than that obviously but the car went a different route. It was removed and I've had it since then. It has been stored in a sealed bag and kept oiled. It has 0 problems and runs without any issues. It has the following components...
GM 6.0L Iron Block.
Lunati Forged Rotating Assembly w/
4" Pro Series Forged Crank
6.125" Pro Billet Forged Connecting Rods
Forged Flat Top Pistons w/ Valve Reliefs
Compression of 9.4:1 with the heads & gaskets on this engine
New Main, Cam, and Rod Performance Bearings
LS6 Balanced/Blueprinted High Volume Oil Pump
Lunati Custom Grind Cam
BPP Stage 3 6.0L Heads with Upgraded Springs & Stainless Valves
ARP Main Studs and Heads Studs
New GM Gaskets
New Cometic Head Gaskets
The timing chain was upgraded to a very heavy duty chain but I'm unsure what brand it was. The camshaft specs i'm not sure of either. It was a fairly mild cam with specs of around 232/238 on a 114 with 570 lift.
It comes as pictured with front & rear + valley and valve covers and a corvette lingenfelter oil pan.
$6000 OBO.
i also have a LS6 intake - $325 shipped obo sold
LS6 LPE Ported throttle body - 150 shipped obo sold
package deal both for 445 shipped obo sold
i also have a complete tan interior out of my 1998 trans am it is in good condition and when i say complete i mean i have everything it does not come with the dash or the center concel i would like to sell it complete for the 1450 shipped obo
seats 800+shipping obo
door panels 300+shipping obo
headliner 150+shipping obo
carpet 100+shipping obo
all other platic pieces 350+ shipping obo
sun visors 75+shipping obo
i will start taking everything out when most parts are sold i would like to sell it as a complete i will take paypal but buyer pays 3% any payment is fine i am looking for some parts so if you have something let me know what you got
i also have a red trans am rear bumper that needs some work done to it i will let that go for 190 + shipping obo
i also got some black out covers for the tail lights on a trans am i had a set and bought another one by mistake so they are still in the plastic they came in 85 shipped obo
i will do trades for a complete d1 procharger kit + cash, fast 90mm intake and fast 90mm NW t/b + cash, built 4l60e/4l65e transmisson with 3600 stall conveter + cash, full bmr suspenison + cash , dana s60 4 channel + cash, direct port n20 kit + cash , or just let me know what you got and i will let you know what i will do
Paypal, Check, CC, or cash is accepted.
Let me know if you have any questions.
if you have any questions you can call me at 1 734 637 7398 that is my cell # or you can email me at jegan1989@comcast.net
thanks joe
these are the pics of the rear bumper cover
these are pics of the ls6 intake
these are pics of the light covers the ones that are in plastic are the ones you are getting the other ones are the ones going on my T/A
these are picks of the front bumper it is not off the car yet but will be as soon as it is bought and the the bird cover thing does not come with the bumper
GM 6.0L Iron Block.
Lunati Forged Rotating Assembly w/
4" Pro Series Forged Crank
6.125" Pro Billet Forged Connecting Rods
Forged Flat Top Pistons w/ Valve Reliefs
Compression of 9.4:1 with the heads & gaskets on this engine
New Main, Cam, and Rod Performance Bearings
LS6 Balanced/Blueprinted High Volume Oil Pump
Lunati Custom Grind Cam
BPP Stage 3 6.0L Heads with Upgraded Springs & Stainless Valves
ARP Main Studs and Heads Studs
New GM Gaskets
New Cometic Head Gaskets
The timing chain was upgraded to a very heavy duty chain but I'm unsure what brand it was. The camshaft specs i'm not sure of either. It was a fairly mild cam with specs of around 232/238 on a 114 with 570 lift.
It comes as pictured with front & rear + valley and valve covers and a corvette lingenfelter oil pan.
$6000 OBO.
i also have a LS6 intake - $325 shipped obo sold
LS6 LPE Ported throttle body - 150 shipped obo sold
package deal both for 445 shipped obo sold
i also have a complete tan interior out of my 1998 trans am it is in good condition and when i say complete i mean i have everything it does not come with the dash or the center concel i would like to sell it complete for the 1450 shipped obo
seats 800+shipping obo
door panels 300+shipping obo
headliner 150+shipping obo
carpet 100+shipping obo
all other platic pieces 350+ shipping obo
sun visors 75+shipping obo
i will start taking everything out when most parts are sold i would like to sell it as a complete i will take paypal but buyer pays 3% any payment is fine i am looking for some parts so if you have something let me know what you got
i also have a red trans am rear bumper that needs some work done to it i will let that go for 190 + shipping obo
i also got some black out covers for the tail lights on a trans am i had a set and bought another one by mistake so they are still in the plastic they came in 85 shipped obo
i will do trades for a complete d1 procharger kit + cash, fast 90mm intake and fast 90mm NW t/b + cash, built 4l60e/4l65e transmisson with 3600 stall conveter + cash, full bmr suspenison + cash , dana s60 4 channel + cash, direct port n20 kit + cash , or just let me know what you got and i will let you know what i will do
Paypal, Check, CC, or cash is accepted.
Let me know if you have any questions.
if you have any questions you can call me at 1 734 637 7398 that is my cell # or you can email me at jegan1989@comcast.net
thanks joe
these are the pics of the rear bumper cover
these are pics of the ls6 intake
these are pics of the light covers the ones that are in plastic are the ones you are getting the other ones are the ones going on my T/A
these are picks of the front bumper it is not off the car yet but will be as soon as it is bought and the the bird cover thing does not come with the bumper
Last edited by jegan1989; 07-12-2007 at 07:31 PM. Reason: price drop
#2
On The Tree
Thread Starter
iTrader: (-1)
Join Date: Jul 2006
Location: DETROIT MI
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
i will take pics of interior later and pics of the the rear bumper later and i will also sell the front bumper cover to it needs some work to the paint i will sell it for 225 + shipping if someone wants it and i will put better pics of the intake and t/b later i want to sell every thing fast
here are the pics of interior if you need more let me know and i will get them as soon as it is sold i will start takeing it out when it is sold it will not take long i work on cars
thanks joe
here are the pics of interior if you need more let me know and i will get them as soon as it is sold i will start takeing it out when it is sold it will not take long i work on cars
thanks joe
Last edited by jegan1989; 06-24-2007 at 09:06 AM. Reason: price drop
Trending Topics
#15
On The Tree
Thread Starter
iTrader: (-1)
Join Date: Jul 2006
Location: DETROIT MI
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
i am not parting out the car just getting rid of stuff i dont need i will sell the front bumper and maybe the hood for the right price like 750 + shipping everything else is not for sale
thanks joe
thanks joe