lq9 block bored and stroked 423ci callies, weisco cheap!!
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
lq9 block bored and stroked 423ci callies, ross cheap!!
I am selling a stroker shortblock I bought from this web sight. it is a 6.0 liter block bored and stroked to a 423 cubic inch. It has
callies crank
callies rods
ross pistons
The engine has about 1500 miles on it. and it even looks better than that.
when I bought it, it needed a new front cam bearing installed. I had atlas machine install all new ones and check out the engine for me. they said I got a deal!! but I am in a money strain right now so all this stuff has to go. I bought it here for 2500 plus shipping,and it needed a new cam bearing.
SOLD with all new cam bearings installed
The short block was set up for nitrous and to run at 11.5 compression ratio with 72 cc heads.
Iam am selling a moser 9 inch also for 2000
and a VFN 5 inch hood for 350.00
I need this stuff gone..
Ill put picks of the short block up tomorrow when I get home from work so you can see it inside and out!! after taking the pics i see the pistons are ross pistons,, sorry for any confusion.
4.125 stroke
4.04 bore
callies crank SOLD
callies rod
ross pistons
11.1:1 compression with 72cc heads
heres the pics!!
callies crank
callies rods
ross pistons
The engine has about 1500 miles on it. and it even looks better than that.
when I bought it, it needed a new front cam bearing installed. I had atlas machine install all new ones and check out the engine for me. they said I got a deal!! but I am in a money strain right now so all this stuff has to go. I bought it here for 2500 plus shipping,and it needed a new cam bearing.
SOLD with all new cam bearings installed
The short block was set up for nitrous and to run at 11.5 compression ratio with 72 cc heads.
Iam am selling a moser 9 inch also for 2000
and a VFN 5 inch hood for 350.00
I need this stuff gone..
Ill put picks of the short block up tomorrow when I get home from work so you can see it inside and out!! after taking the pics i see the pistons are ross pistons,, sorry for any confusion.
4.125 stroke
4.04 bore
callies crank SOLD
callies rod
ross pistons
11.1:1 compression with 72cc heads
heres the pics!!
Last edited by THE DEACON; 07-24-2007 at 08:14 PM. Reason: adding pics and piston name