MAC Headers/ORY...Predator Programmer...10Lbs NOS bottle...Meziere Pump LT1 & More
#1
TECH Apprentice
Thread Starter
iTrader: (18)
Join Date: Feb 2004
Location: Fort Mill SC
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
MAC Headers/ORY...Predator Programmer...10Lbs NOS bottle...Meziere Pump LT1 & More
Here is the link to view everything i am selling http://s115.photobucket.com/albums/n316/formulapower/
LS1/LT1 PARTS
3. 10 Lbs Nitrous Bottle long style. This bottle is in good working shape. It does have some scuffs and a good repainting would go it good. It is NOS brand and it is the longer skinner style bottle. It has the Hi-Flo valve and works very well.
PRICE....75 SHIPPED
5. Camaro Driver Side Control switches (Power mirrors...Power windows.. Power door Locks) This is one of the few parts i have left from a car i parted out. This piece tested well in the car and all of it's functions worked well. Great cheap part for someone who have broken there own piece. I got this out of an LS1 car so i know it will fit all LS1 camaros but i am not sure about LT1 Pics will help you decide on the application
PRICE...15 SHIPPED
SBC PARTS
1.Edelbrock Chrome Valve Covers with 7 Twist bolts. Got these off an old motor i had they are in decent shape and don;t leak. there is some rust on the back sides on the covers ( the side that would be towards the firewall) but it is not bad. Covers also include 7 out of the 8 needed twixt screw bolts need to tighten down the manifold. I need to move these so they are marked cheap
PRICE...20 SHIPPED
2. SBC Nitrous Camshaft. this cam was in my motor for only about 3k miles and is in good shape and worked perfect when removed from the vehicle. It is a nitrous shaft with the specs Advertised Duration 284/305, Lift .507/.525,
PRICE... 50 SHIPPED
3. AFR/Brownsfield heads. before AFR was called AFR they were called Brownsfield heads these heads are about 10 years old and came off of a 408 small block chevy engine. I will probably get these flowtested in the next week. They are completely ported with larger valves 2.02/ 1.60 and some VERY stout looking valve springs (good to 650 lift) also have screw in studs. I bought these off of a friend who had these on his 408 drag car...so they can make some power
PRICE...500 shipped SALE PENDING
BBC PARTS
1. Mallory Distributor for BBC engine. This is a low profile distributor that is great for putting a large BBC into a samller car where clearances can be an issue. I had it in a 402 Big block (bored out 396) that was in a 3rd gen camaro and it worked perfect to solve my clearance issues. It worked great when it came off the car and should be ready to bolt on a run
PRICE...40 SHIPPED
2. Forged GM pistons for BBC. These pistons measure 4.125 in diameter and come with stock big block rods. These are great for someone looking t increase there power on there BBC by increasing bore size. Not to mmention they will take the abuse of nitrous or boost. They have about 1000 miles on them and have had a very easy life so they are ready to be installed with a good set of rings
PRICE...100 SHIPPED
LS1/LT1 PARTS
3. 10 Lbs Nitrous Bottle long style. This bottle is in good working shape. It does have some scuffs and a good repainting would go it good. It is NOS brand and it is the longer skinner style bottle. It has the Hi-Flo valve and works very well.
PRICE....75 SHIPPED
5. Camaro Driver Side Control switches (Power mirrors...Power windows.. Power door Locks) This is one of the few parts i have left from a car i parted out. This piece tested well in the car and all of it's functions worked well. Great cheap part for someone who have broken there own piece. I got this out of an LS1 car so i know it will fit all LS1 camaros but i am not sure about LT1 Pics will help you decide on the application
PRICE...15 SHIPPED
SBC PARTS
1.Edelbrock Chrome Valve Covers with 7 Twist bolts. Got these off an old motor i had they are in decent shape and don;t leak. there is some rust on the back sides on the covers ( the side that would be towards the firewall) but it is not bad. Covers also include 7 out of the 8 needed twixt screw bolts need to tighten down the manifold. I need to move these so they are marked cheap
PRICE...20 SHIPPED
2. SBC Nitrous Camshaft. this cam was in my motor for only about 3k miles and is in good shape and worked perfect when removed from the vehicle. It is a nitrous shaft with the specs Advertised Duration 284/305, Lift .507/.525,
PRICE... 50 SHIPPED
3. AFR/Brownsfield heads. before AFR was called AFR they were called Brownsfield heads these heads are about 10 years old and came off of a 408 small block chevy engine. I will probably get these flowtested in the next week. They are completely ported with larger valves 2.02/ 1.60 and some VERY stout looking valve springs (good to 650 lift) also have screw in studs. I bought these off of a friend who had these on his 408 drag car...so they can make some power
PRICE...500 shipped SALE PENDING
BBC PARTS
1. Mallory Distributor for BBC engine. This is a low profile distributor that is great for putting a large BBC into a samller car where clearances can be an issue. I had it in a 402 Big block (bored out 396) that was in a 3rd gen camaro and it worked perfect to solve my clearance issues. It worked great when it came off the car and should be ready to bolt on a run
PRICE...40 SHIPPED
2. Forged GM pistons for BBC. These pistons measure 4.125 in diameter and come with stock big block rods. These are great for someone looking t increase there power on there BBC by increasing bore size. Not to mmention they will take the abuse of nitrous or boost. They have about 1000 miles on them and have had a very easy life so they are ready to be installed with a good set of rings
PRICE...100 SHIPPED
Last edited by Formula_Power; 08-11-2007 at 07:26 PM.