F/s Tsp Cnc Ported 243 Heads
11-10-2007, 12:07 PM
#1
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
F/s Tsp Cnc Ported 243 Heads These heads are TSP CNC Ported 243s and flow alot to make alot of power. They come with the standard size valves and no springs, etc. TSP is an ls1tech sponsor and they provide great performance flowing heads. Visit their website for additional information to include flow numbers.
I bought them here on ls1tech to use on my 2001 gmc sierra truck in which i plan to put a built 6.0l and it is too heavy which more requires bottom end torque more than ouright horsepower which would be more suitable to a car.
Selling for $675 including shipping. Thanx for looking.
I havent sold on ls1tech but you can check my ebay feedback under RBA6165.
I bought them here on ls1tech to use on my 2001 gmc sierra truck in which i plan to put a built 6.0l and it is too heavy which more requires bottom end torque more than ouright horsepower which would be more suitable to a car.
Selling for $675 including shipping. Thanx for looking.
I havent sold on ls1tech but you can check my ebay feedback under RBA6165.
11-10-2007, 11:36 PM
#6
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
as ad says on 2nd line, "They come with the standard size valves and no springs, etc."
i will clarify and hope this helps. the standard size valves on ls6 heads are 2.00 and 1.55 valves. they do not come with springs or anything else.
the item number on the tsp website is 199-prc1.0ls6 and they are titled "all new prc ls6 ls6 cnc ported heads". there is no stage mentioned on the tsp website for them.
of course these are used heads now since the previous owner used them. he stated that he used them for approximately 14k miles. i cannot confirm these ok. they normally retail for $1249.99 and according to tsp are said to make 50rwhp over stock.
the flow numbers for them according the tsp website are as follows:
.100 - 72cfm
.200 - 149
.300 - 205
.400 - 255
.500 - 287
.600 - 307
.625 - 310
i think i have answered everyone's questions here. thanx for you all interests and good luck with you all projects. rob in elsa, texas.
i will clarify and hope this helps. the standard size valves on ls6 heads are 2.00 and 1.55 valves. they do not come with springs or anything else.
the item number on the tsp website is 199-prc1.0ls6 and they are titled "all new prc ls6 ls6 cnc ported heads". there is no stage mentioned on the tsp website for them.
of course these are used heads now since the previous owner used them. he stated that he used them for approximately 14k miles. i cannot confirm these ok. they normally retail for $1249.99 and according to tsp are said to make 50rwhp over stock.
the flow numbers for them according the tsp website are as follows:
.100 - 72cfm
.200 - 149
.300 - 205
.400 - 255
.500 - 287
.600 - 307
.625 - 310
i think i have answered everyone's questions here. thanx for you all interests and good luck with you all projects. rob in elsa, texas.
11-11-2007, 12:30 AM
#7
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
i looked up previous owner's (bluesteel) ad, dated 07-18-07 which is when i bought the heads and mileage he mentioned was 1400 miles and not 14k as i mentioned earlier. i was unable to copy pics as they no longer appear in ad. fyi.
Trending Topics
11-11-2007, 12:24 PM
#9
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
Sorry Fellas About No Pics As I Dont Have A Digital Camera Or Know Anyone With One. The Heads Have The Valves In Place With Tape Over Them And Are In A Box In My Closet.
One Other Thing I Forgot To Mention Which Might Be Helpful To All Of Us Is That I Will Consider Partial Trades For Parts I May Need For My Build-up. Hope This Helps. Thanx Again For Your Interest. Rob.
One Other Thing I Forgot To Mention Which Might Be Helpful To All Of Us Is That I Will Consider Partial Trades For Parts I May Need For My Build-up. Hope This Helps. Thanx Again For Your Interest. Rob.
11-11-2007, 06:46 PM
#12
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
ttt. getting some interesting offers on partial trades but no buyer yet on these great set of heads. not in a hurry myself but just to keep everyone posted. thanx, rob.
11-11-2007, 10:00 PM
#14
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
all pms replied to.
parts i may be able to use is some preferably new or almost new 918 springs or similar, hardened 7.4 pushrods, titanium retainers, wal-bro fuel pump, certain size aluminum radiator, msd wires. these parts must fit my 2001 gmc sierra and a 6.0l motor.
lowered price to $650 as a compromise to some offers i have received. best i can do price wise at this moment but if you have parts, i will consider. thanx, rob.
parts i may be able to use is some preferably new or almost new 918 springs or similar, hardened 7.4 pushrods, titanium retainers, wal-bro fuel pump, certain size aluminum radiator, msd wires. these parts must fit my 2001 gmc sierra and a 6.0l motor.
lowered price to $650 as a compromise to some offers i have received. best i can do price wise at this moment but if you have parts, i will consider. thanx, rob.
11-12-2007, 12:09 AM
#16
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
they are presently on sale at tsp for $1049.99 and a good deal to buy new if that is what you want and have the money for them. how much are standard springs, like $75, $85 maybe. these came with that same comp valve job. to those $1049.99, you still have to add like $50 for shipping making for at least $1100.
mine are best price of $650 shipped, $450 less (than $1100) and you decide which springs, etc you want to use if you dont already have some good ones to put on. i think $650 shipped is quite reasonable considering and even more since i am considering partial trades. best i can do right now.
to other potential buyers who have inquired about the heads, let me say that i ship fast and that the item will be well packaged. thanx again to all, rob.
mine are best price of $650 shipped, $450 less (than $1100) and you decide which springs, etc you want to use if you dont already have some good ones to put on. i think $650 shipped is quite reasonable considering and even more since i am considering partial trades. best i can do right now.
to other potential buyers who have inquired about the heads, let me say that i ship fast and that the item will be well packaged. thanx again to all, rob.
11-12-2007, 10:11 AM
#18
11-12-2007, 02:26 PM
#20
MASS seller approved
Thread Starter
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,427
Received 133 Likes
on
89 Posts
i dont even have a camera phone, i am old school...lol. sorry i cant be of more help. i try to be as honest and straighforward as i can with folks. my overall ebay feedback (RBA6165) is a 98.3 and my selling is 100.0. if i stay stuck with them, so be it. maybe i will have to buy a camaro ss...lol.