Hardcore guys: 95mm throttlebody, aluminum elbow
#1
Hardcore guys: 95mm throttlebody, aluminum elbow
Powdercoated black sheetmetal elbow and a Wilson Manifold 95mm billet throttlebody. The elbow has 1/4" and 1/8" bungs tig welded on.
Also included is an adapter to run a gm IAC. The ford tps sensor and IAC valve will also be included.
All of this has 0 miles, brand new.
Here is what is cost to put together:
Sheetmetal 4150 elbow - 220
Powdercoating = 80
WIlson Throttlebody = 370
ASSC IAC adapter plate - 80
GM IAC motor - 72
Ford TPS sensor - 45
Total = 865
I will seperate this to the elbow an throttlebody if needed.
Throttlebody with all the sensors and adapters - 500$
Powdercoated elbow- 190$
Or... 670 for both
Last edited by xssive; 02-16-2008 at 08:18 PM.
Trending Topics
#9
Wilson tb is solid billet aluminum and the linkage on the tb itself can be changed in 90 degree increments to better suit how your throttle cable is going to be run. With the accufab tb, you are stuck with the linkage welded onto the shaft, and the throttle cable has to be set up at a very weird angle to get it to work right.