#241 Ported Heads Complete
03-08-2008 | 02:27 PM
#1
#241 Ported Heads Complete For Sale:
#241 Hand Ported heads
I'll list what I know about these heads. The heads were ported by xfactor_pitbulls from this board. I am selling the heads because I just slapped on some Trick Flows. I had them flowed at James Lee Automotive here in Tulsa. @ .600 they flow 298 CFM. From .100 to .600 they were 10-20 CFM above a patriot stage two (right around a Patriot Stage 3 until .550 and .600).
The valves are 2.02 and 1.60 I beleive. The intake runner is a 230CC.
I used these heads for around 3000 miles. When I got them I put new PRC Gold springs, Ti retainers, seals, and seats on them.
The combustion chamber has been milled to 59CC. This will make a stock shortblock car 11.05:1 with stock head gaskets or 11.37:1 with .041 head gaskets.
If you have any questions or would like more pictures of the heads please feel free to PM me.
$675 SHIPPED
#241 Hand Ported heads
I'll list what I know about these heads. The heads were ported by xfactor_pitbulls from this board. I am selling the heads because I just slapped on some Trick Flows. I had them flowed at James Lee Automotive here in Tulsa. @ .600 they flow 298 CFM. From .100 to .600 they were 10-20 CFM above a patriot stage two (right around a Patriot Stage 3 until .550 and .600).
The valves are 2.02 and 1.60 I beleive. The intake runner is a 230CC.
I used these heads for around 3000 miles. When I got them I put new PRC Gold springs, Ti retainers, seals, and seats on them.
The combustion chamber has been milled to 59CC. This will make a stock shortblock car 11.05:1 with stock head gaskets or 11.37:1 with .041 head gaskets.
If you have any questions or would like more pictures of the heads please feel free to PM me.
$675 SHIPPED
Last edited by Jordan S.; 03-10-2008 at 10:52 PM. Reason: Price Changed from $750 shipped
Trending Topics
03-10-2008 | 10:50 PM
#12
I can't find the flowsheet anywhere. Brandon's computer that held his flow numbers from these heads crashed so no luck there either.
I'll garuntee they flow within 5% of 298 CFM though. The low end numbers were higher than about three quarters of the hand ported heads I've seen on here. I can't recall what they were it has been to long.
I'll garuntee they flow within 5% of 298 CFM though. The low end numbers were higher than about three quarters of the hand ported heads I've seen on here. I can't recall what they were it has been to long.
