For Sale: Miscellaneous Parts
#1
Thread Starter
TECH Apprentice
iTrader: (19)
Joined: Aug 2004
Posts: 344
Likes: 0
From: Charleston, SC
For Sale: Miscellaneous Parts
Compucar Nitrous-in-a-bag System=This system has only been used once. It actually still has some of the original fill still in it. $240 +Paypal fees and S&H.
NX Automatic Bottle Heater= $100+Paypal fees and S/H
NX Billet 85mm MAF & Z06 MAF= I bought this from Nitro Dave and never used the Nitrous portion of it. I had to cut my C5 Z06 MAF housing in half to screw the two pieces together. I have $300 in the NX piece and $190 in the MAF and pigtail=$490. I'll take $275 and your "fully functioning" stock LS1 MAF+paypal fees and S/H
NX Custom Jet Pack= There are a couple of custom shots to accompany any shark nozzle setup that DO NOT come with the standard kit. $25+paypal fees and S/H SOLD
Moser Engineering Billet 1350 Yoke= Moser 1350 Billet Yoke used for 6 months. The black splatter on it is the POR 15 that I coated the 12 bolt with. I paid $160 for it. I'll take $50 +paypal fees and S/H.
FAST or LS6 intake gaskets= These were used for a dyno sessions to determine if the GREY gaskets were the culprit of an airleak. My two year old ran off with one and I cannot find it. But these are great for any LS6 or FAST intake for extras. $5 +paypal fees and S/H (I now have an LS7 intake or I'd just keep them) SOLD
Textralia 0700AB= This setup has 1,400 miles on it and ZERO track passes (when I spun some crank bearings from oil starvation). When a new motor was being put in my friend cross threaded 3 bolts. I couldn't wait on this one to get fixed so I overnited a new clutch and just held on to this one. All that is needed is to heli-coil 3 of the holes. Personally, I'd do all of them to ensure it never happened again. I paid $1050 for this clutch. I'll take $500+paypal fees and S/H SOLD
(2) stock Steel Flywheels that have never been turned so they are in good shape $15ea +paypal fees and S/H
JUST ADDED:
Sebring Silver Camaro SS hood (LS1)- It is an Aftermarket Lighweight SS hood. But it is going to have to be either "PICKUP ONLY" or I can meet you somewhere within reason, $450 picked up, $525 if I meet you somewhere within reason. http://s15.photobucket.com/albums/a3...r%20SS%20hood/
All pics can be seen here: http://s15.photobucket.com/albums/a3...ale/?start=all
Thank you,
Jeff
NX Automatic Bottle Heater= $100+Paypal fees and S/H
NX Billet 85mm MAF & Z06 MAF= I bought this from Nitro Dave and never used the Nitrous portion of it. I had to cut my C5 Z06 MAF housing in half to screw the two pieces together. I have $300 in the NX piece and $190 in the MAF and pigtail=$490. I'll take $275 and your "fully functioning" stock LS1 MAF+paypal fees and S/H
NX Custom Jet Pack= There are a couple of custom shots to accompany any shark nozzle setup that DO NOT come with the standard kit. $25+paypal fees and S/H SOLD
Moser Engineering Billet 1350 Yoke= Moser 1350 Billet Yoke used for 6 months. The black splatter on it is the POR 15 that I coated the 12 bolt with. I paid $160 for it. I'll take $50 +paypal fees and S/H.
FAST or LS6 intake gaskets= These were used for a dyno sessions to determine if the GREY gaskets were the culprit of an airleak. My two year old ran off with one and I cannot find it. But these are great for any LS6 or FAST intake for extras. $5 +paypal fees and S/H (I now have an LS7 intake or I'd just keep them) SOLD
Textralia 0700AB= This setup has 1,400 miles on it and ZERO track passes (when I spun some crank bearings from oil starvation). When a new motor was being put in my friend cross threaded 3 bolts. I couldn't wait on this one to get fixed so I overnited a new clutch and just held on to this one. All that is needed is to heli-coil 3 of the holes. Personally, I'd do all of them to ensure it never happened again. I paid $1050 for this clutch. I'll take $500+paypal fees and S/H SOLD
(2) stock Steel Flywheels that have never been turned so they are in good shape $15ea +paypal fees and S/H
JUST ADDED:
Sebring Silver Camaro SS hood (LS1)- It is an Aftermarket Lighweight SS hood. But it is going to have to be either "PICKUP ONLY" or I can meet you somewhere within reason, $450 picked up, $525 if I meet you somewhere within reason. http://s15.photobucket.com/albums/a3...r%20SS%20hood/
All pics can be seen here: http://s15.photobucket.com/albums/a3...ale/?start=all
Thank you,
Jeff
Last edited by FRDnemesis; 06-23-2008 at 01:46 PM.
Trending Topics
#10
Thread Starter
TECH Apprentice
iTrader: (19)
Joined: Aug 2004
Posts: 344
Likes: 0
From: Charleston, SC
It is a complete assembly i.e. Pressure plate, clutch disc and Aluminum Flywheel. You can get an alignment tool from any autoparts store for about $2. Take a look at the link in the bottom of my post up top and you will see pics of all the components that I'm trying to sell.
Thank you,
Jeff
Thank you,
Jeff
#11
Thread Starter
TECH Apprentice
iTrader: (19)
Joined: Aug 2004
Posts: 344
Likes: 0
From: Charleston, SC
PM's
All PM's replied to. Guys, I have had PM's from different people interested in the same components. I will clearly keep people posted as soon as someone has paypal'd me a payment for a component.
Thank you,
Jeff
Thank you,
Jeff
#13
Thread Starter
TECH Apprentice
iTrader: (19)
Joined: Aug 2004
Posts: 344
Likes: 0
From: Charleston, SC
It is a Dry cheater system that has to be placed somewhere before the MAF. If you go to http://www.compucarnitrous.com/index...kits&Itemid=66
You can read about it on Compucars site.
Thanks
Jeff
#14
Thread Starter
TECH Apprentice
iTrader: (19)
Joined: Aug 2004
Posts: 344
Likes: 0
From: Charleston, SC
Thanks for the PM's guys. I have updated the list and two things have sold through PM's. Thank you for the guys who have posted here also and I hope I have answered all of your questions.
-jeff
-jeff