MS3 Cam
#1
Teching In
Thread Starter
iTrader: (14)
Join Date: Dec 2005
Location: Cali
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
MS3 Cam
I purchased this cam used with very low miles and never installed. Looks practically new, but would not clear my heads, so I went with something smaller. Anyways, its just sitting around the parts shelf, figured someone might be in the market for it. The specs are: 237/242 .603/.609 112 LSA. Looking to get $300 shipped. I accept paypal, PM me for additional info or any questions.
Last edited by USN00Z28; 09-27-2008 at 07:52 AM.
#6
Teching In
Thread Starter
iTrader: (14)
Join Date: Dec 2005
Location: Cali
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I have the PRC 2.5 5.3 Heads, and the valves have not been recessed to clear the MS3 cam. This cam, will however clear your stock heads, you will have to get new springs that can accommodate the lift though.
Trending Topics
#19
TECH Apprentice
iTrader: (19)
Join Date: May 2007
Location: Deland, FL
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I know this is allready sold, but I am considering buying the same cam. You mention that they wouldnt clear your heads. I have 98 C&Cd heads that are shaved 30 thou. Will I have to flycut or anything? It looks like from the specs I have read that I should be ok, but just curious if you would know for sure. I currently have a 234 236 598 602 on a 111+4 without issue
Thanks in advance
John
Thanks in advance
John