Where can I find a a C100 Connector ( Big connector on passenger side fender ) it has the wires for the fans and other things...

Mine broke during the !wire mod.. How lame

Just curious if anyone knows where to get this conenctor.

Thanks

-mark

 

Junk Yard bro, that will be a common piece. Then you will just have to re-pin it.

 

Only junkyard aorund me has 2 camaros, and they're v6's....

Does it matter?

-mark

 

They should have them on the Wheel Well.

 

But it doesnt matter if its a v6 or lt correct?

If not then ya I can get one.

What terminals do they use inside?

 

Just find one and pin your wires into it. No need to cut them

 

V6's have the same. What do you mean by what Terminals?

You mean which Wires are used?

They are called Pins, and to replace that the correct way would be to take the Wires out of the broken Connector and put them in the new Connector the exact spot they were in.

An alternate way would be to use some Butt Connectors and cut it off and put it back together the way the Wires were, keep them lined up in the same spot.

 

Some people may not know how to get them apart. I've been looking for the little Tool that does that, I've seen one before and have never found one again. I have been stuck using a small Paper Clip.

 

I mean terminals as in the actual piece thats going to make contact with the body side.

My harness isnt long enough to my liking. So I would get the new c100 from the yard, pin in with new pins, then just pig tail and solder wires one by one according to the old one.

 

a sponsor on this site has them

heres the link:

http://www.lsxtune.com/shop/index.php/cPath/111_113