Problem that I can not figure out!
#83
Staging Lane
Thread Starter
Join Date: Dec 2007
Location: west palm beach, fl
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its not the o2's. I unplugged them today and it didnt make any difference.
A thing I noticed though is that my fuel pressure is around 35psi at idle and doesnt change much when its reved. If I pull the vacuum line off the regulator it jumps up to about 45psi. Which is where it SHOULD be, right?
A thing I noticed though is that my fuel pressure is around 35psi at idle and doesnt change much when its reved. If I pull the vacuum line off the regulator it jumps up to about 45psi. Which is where it SHOULD be, right?
#84
Staging Lane
Thread Starter
Join Date: Dec 2007
Location: west palm beach, fl
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm also wondering if a loose rocker arm would cause this? I'm beginning to hear a slight ticking at idle.
I'm just trying to think of any possiblilty cause i REALLY need my car back running since its been sitting for close to 2 months.
I'm just trying to think of any possiblilty cause i REALLY need my car back running since its been sitting for close to 2 months.
![MAD](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_mad.gif)