DA should be -1000 or more for the day

plan to test a few thing more on motor and then spray the car and hope the track holds

updates this evening

 

Can't wait! Good luck!

 

You dog you. Damn I wish I didn't have to pull a 12 hr. shift today. Gotta work though, so you can tweak my set-up some more.
Can't wait for your results Larry, good luck!! Hopefully you'll get some video.

 

Its perfect out For the track!!!!!! You should see some killer numbers! If my ride was done and I didnt have to work. Id be right there with ya!!!! GLD or Byron???
I see 9 sec slips by the end of the day!!! Good luck!!

 

good day, but no 9 sec pass due to being lean and no other T's for the dry kit

anyway it did run great on motor though the track was not there like my home track Byron was a few weeks back

I was unable to leave as hard as my first visit which I was leaving at 2500 off the foot brake. The most I did today was 2000 and was getting some slight tire shake due to cold track temps and the bite just wasn't there. I still matched my best 60 from before of 1.45 even with the small tire shake and still pulling the wheels

best pass of the day

10.89 @ 123 and this was with a 1.46 60ft

1.46
4.40
6.90
98.44
9.06
10.89
123.33

DA was good, but nothing crazy as I expected -610

I guess it's spring time to test the N20 now and plan for some changes for the NA class.

I also took some data for Yank to work with since my converter is on the loose side. The RPM would drop about 1000 rpm between shifts which leaves me some room for improvement as well.

oh yeh... drove it there and back without a problem though it was a little cold with no heat.

 

Ive been waiting for this post all Day!! That thing is flying! Its gonna be a long winter thinking about sprayin that bad boy!!!

 

HA! yes it will be.

 

According to their website its open next week too!

 

yes..they did mention that, but I'm done for now. I'm going to plan to detail it next weekend and put it away until the salt is off the roads. I would be up for watching if you go with your ride.

 

nice run, Larry.

 

Very nice run on motor, Larry. Too bad I missed it.

 

thanks guys

Butch and Mike..if you guys plan to go next weekend let me know.

 

Larry,
Nice job again. What gear do you have in that? RPM through the traps?

Jon

 

Oh yeah. Im ready to test it out as long as its open! Speaking of that are you guys open on friday?

 

Jon..thanks

3.73, 275/60/15 and it goes through around 6600

Mike.. service will be closed Thur-Sat, but the sales guys will be in Fri-Sat.

 

Cool!

 

That is sixty footing pretty good with the 3.73.

 

I'm planning for next Sunday if weather is like today

Hows teching in? any problems for me you think?

 

Just tell them it runs 12.s

 

How are you logging Larry, do you have a wideband in your car? I have the next size up T laying around somewhere if you need it from my old setup, but you probably have one back at the shop. Let me know and I can look up the exact size, although sounds like you are done until spring anyway.