Best heads for lt4 hotcam
#1
#4
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't waiste putting a better set of heads on (then stock) with just the hotcam, you can get a custom grind from Lloyd Elliot with his budget heads & gain a good 70-75 rwhp (over stock heads/cam), his cam alone should net 20-25 rwhp if not more over the hotcam, the budget heads are good for another 30 rwhp.
#5
TECH Fanatic
Thread Starter
iTrader: (5)
Join Date: Aug 2007
Location: colorado springs Elevation: 6035 ft
Posts: 1,053
Likes: 0
Received 1 Like
on
1 Post
I thought I read somewhere that the le1 cam only puts down 5-10 rwhp more than the hotcam? I have also read about people with ported heads and hotcam putting down somewhere around 400rwhp. Seems like with 1.7 rockers the hotcam would be damn close to an le1 cam. Hotcam with 1.7 rockers 218/228/.557/.557 112 lsa, le1 cam 218/224 .544/.544 111 LSA
Trending Topics
#12
11 Second Club
iTrader: (35)
I thought I read somewhere that the le1 cam only puts down 5-10 rwhp more than the hotcam? I have also read about people with ported heads and hotcam putting down somewhere around 400rwhp. Seems like with 1.7 rockers the hotcam would be damn close to an le1 cam. Hotcam with 1.7 rockers 218/228/.557/.557 112 lsa, le1 cam 218/224 .544/.544 111 LSA
First thing I would do is get the best heads you can afford and then toss in a custom grind to compliment them otherwise you will be hindering yourself.
#13
TECH Fanatic
Thread Starter
iTrader: (5)
Join Date: Aug 2007
Location: colorado springs Elevation: 6035 ft
Posts: 1,053
Likes: 0
Received 1 Like
on
1 Post
I think im just going to find a block and build something nasty. And spray the **** out of my motor I have now. Will the stock heads flow a 200 shot of nitrous?
#14
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
Exactly!! The cam i was talking about was a custom grind from Lloyd as we talked on the phone, it spec'd 565/565, 223/230 @ 50 on a 110 LSA, ground on a 110 it was worth 10 & 10 more then the cc503, & i'm sure the cc503 makes more HP & TQ then the hotcam, if you decide to build a nice motor, go for cubes, then match a nice head/cam combo for your whole package & intended use.
#19
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
Sure with Nitrous, but without it hes at 358, those #s can be had with stock heads & a 503 cam if tuned right, with lloyds budget heads & the cam we talked about would be in the 375 HP range, step up too the LE2 heads & cam & your over 400 HP, There is no sence in getting a good set of heads & scimping with the cam, you want to "match" the set for best overall HP/TQ. Putting on a good breathing set of heads & a small cam is like putting in a good cam with skimpy heads, your defeting the purpose.
#20
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
396 would be the smallest i would go, sounds like a good plan, build a solid foundation (bottom end), then get a nice head/cam/intake/injector package BEST suited for those Cubes.