New pics and cc306 idle vid!
02-07-2009, 10:35 AM
#22
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Posted this some time ago right before my clutch blew: here's the 1/8th mile time and a link to my original post.
https://ls1tech.com/forums/lt1-lt4-m...-bolt-ons.html
Copy/paste from my old thread:
Launched at 1900rpm, spun a little and bogged but still came out hard. Ran a friends bolt-on LS1 and chased him down near the 1/8. He ran 12.8@110 with the same 60ft.
Best time:
60ft...... 2.0
1/8th.... 8.37@88.5mph
1/4mi.... 12.7@114mph
https://ls1tech.com/forums/lt1-lt4-m...-bolt-ons.html
Copy/paste from my old thread:
Launched at 1900rpm, spun a little and bogged but still came out hard. Ran a friends bolt-on LS1 and chased him down near the 1/8. He ran 12.8@110 with the same 60ft.
Best time:
60ft...... 2.0
1/8th.... 8.37@88.5mph
1/4mi.... 12.7@114mph
02-07-2009, 10:04 PM
#25
12 Second Club
iTrader: (12)
Join Date: Apr 2008
Location: San Marcos, TX
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
sounds much like my 306 lol. What mufflers u got? im running x-pipe with bullet dumps, mine has a little more aggressive sound when revv-ed up but at idle sounds similar to urs.
02-08-2009, 07:21 AM
#26
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
I have a Dynomax bullet dumped before the axle. It sounds realy nice but Im thinking of going with a 2.5" x-pipe with no mufflers like I had before on mmy TransAm. Still need a couple more things to do before it hits the track but it'll be done in a few weeks.
Got any sound clip of yours?
Got any sound clip of yours?
02-08-2009, 07:52 AM
#27
TECH Regular
Join Date: Aug 2007
Location: Cypress, TX
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
http://s121.photobucket.com/albums/o...t=DSC04042.jpg
So, more important than the photo - what's the parts list on this?
And maybe a list of steps required to get it to the finished product?
02-08-2009, 09:00 AM
#28
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Yes that's my car LOL!!! I know I've been saying I was gonna make a thread about the parts used for this CAI setup, but today is the day! Since its finally running again I can pull it out of the garage and get some decent pics. I dont have prices or part #s for any of the stuff but Im sure someone can chime in to identify any misc parts not available at Home Depot or any other hardware store.
-Isaac-
-Isaac-
02-08-2009, 05:18 PM
#29
12 Second Club
iTrader: (12)
Join Date: Apr 2008
Location: San Marcos, TX
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
I have a Dynomax bullet dumped before the axle. It sounds realy nice but Im thinking of going with a 2.5" x-pipe with no mufflers like I had before on mmy TransAm. Still need a couple more things to do before it hits the track but it'll be done in a few weeks.
Got any sound clip of yours?
Got any sound clip of yours?
I dont currently have any, I would like to do one and I have a camcorder; just missing a way to upload it to the computer. Ill post if I can ever figure that out. LOL
My car looks like crap but runs good. LMFAO its a sleeper.
02-11-2009, 09:51 PM
#31
On The Tree
iTrader: (3)
Join Date: Jan 2009
Location: Columbia SC
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Man i love the way you car sounds, and im looking to buy a cam soon myself. What all did you upgrade valvetrain wise ? Also is this the cam you have http://www.jegs.com/i/Comp+Cams/249/07-306-8/10002/-1
Last edited by Bullet95z28; 02-11-2009 at 10:06 PM.
02-11-2009, 09:58 PM
#32
Yes that's my car LOL!!! I know I've been saying I was gonna make a thread about the parts used for this CAI setup, but today is the day! Since its finally running again I can pull it out of the garage and get some decent pics. I dont have prices or part #s for any of the stuff but Im sure someone can chime in to identify any misc parts not available at Home Depot or any other hardware store.
-Isaac-
-Isaac-
02-12-2009, 03:29 PM
#34
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Man i love the way you car sounds, and im looking to buy a cam soon myself. What all did you upgrade valvetrain wise ? Also is this the cam you have http://www.jegs.com/i/Comp+Cams/249/07-306-8/10002/-1
Don't know if you checked out the thread I posted here on the LT1 section. Here it is. The elbow is 90* but once its actually on the car its going to be a little less because of the flex tubing. PM the Taste_Good about the exact bend since he fabbed up a killer 3.5" Aluminum tubing in place of my crappy Fernco.
02-12-2009, 08:20 PM
#36
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
It was already on my car when I bought it, but its available on summit, jegs, Thunder Racing, or even check the for sale section as I just saw one last night.
02-13-2009, 10:43 PM
#40
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Palmview, Tx
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
No I don't daily drive the car, but it has no problems whatsoever in 5 o'clock traffic. I think its a great cam for a budget build, but Id still prefer custom grind. Everyone gives me the thumbs up, even a H/C/I 5.0 Stang owner loved how it sounded LOL!