Cammed LT1 problems 2
Thread Starter
Teching In
Joined: Nov 2008
Posts: 37
Likes: 0
Cammed LT1 problems 2 Thanks for the feed back,I found the problem. Had to take the alternator off to get the valve cover off to readjust the valves.Missed the hookup on the voltage regulator,only has the hot from battery hooked up.Car ran great!!!!Idles about 900rpm. About 30psi of oil pressure at hot idle,over 50 at 5000.Notice some milkiness in valve cover,but I'm thinking its from sitting for 2 months in garage with me turning the heat on and off.I'll check it again after I change the oil.Monday we'll get the exhaust welded up and get some vid.SEE YA
Thanks for the feed back,I found the problem. Had to take the alternator off to get the valve cover off to readjust the valves.Missed the hookup on the voltage regulator,only has the hot from battery hooked up.Car ran great!!!!Idles about 900rpm. About 30psi of oil pressure at hot idle,over 50 at 5000.Notice some milkiness in valve cover,but I'm thinking its from sitting for 2 months in garage with me turning the heat on and off.I'll check it again after I change the oil.Monday we'll get the exhaust welded up and get some vid.SEE YA
