Fuel pump removal
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pump removal
I'm about to replace the fuel pump and last time it was a nightmare dropping the axel, exhaust,and tank. This time I plan on pulling it from the top and someone on here a long time ago had everything laid out with dimenshions, placement and making a cover. It looked factory. I saved the piece into my documents but the harddrive took a **** and lost it all. Does anyone know where I can get this info back??
#2
Launching!
Join Date: May 2007
Location: knoxville tn
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
i can t help you on where to find that info. but it seems like the fuel pump hole should be cut toward the front and in the center if that big hump. i would just guess its 6x6 hole would be enough to get it out. maybe a little bigger.
#4
is this what your talking about? hope it helps
http://www.fastbird93.com/Installations/Racetronix.htm
http://www.fastbird93.com/Installations/Racetronix.htm
#7
Trending Topics
#8
TECH Fanatic
iTrader: (1)
i recommend pneumatic shears. measure out a rectangle, drill a pilot hole, shear the sheet metal. very easy, no sparks, safer... took my friend and i about 1.5 total with a custom cover.
something like these: http://www.bosstoolsupply.com/index....OD&ProdID=5595
something like these: http://www.bosstoolsupply.com/index....OD&ProdID=5595
#12